Jump to content
SAU Community

Recommended Posts

Here's a heads-up to any SAU'ers chasing an elusive R34 GTR RB26DETT. This engine has less than 15,000 genuine kilometres on it. Those in the know will already recognise the R34 spec' engine as a superior RB series to what I have in my car and any of the R32 GTR's. If you're not up to speed, the 34 RB26DETT had different lift and duration on the factory "bumpsticks"- which is one of the reasons why 34's have more Kw and torque straight out of the box over other GTR engines. You can't retro fit these cams to earlier engines; the head had a totally different casting to make the camshafts fit. Plus the 34 block has the same strengthening "webbing" that the fabled N1 blocks have: much better strength once you start to lean on these engines. This particular engine is a long motor: no turbos or plenum. Everything else is there. Whilst the engine is easily viewable, I don't need a million wannabe engine tuners wasting my time; if you're SERIOUSLY considering the best of the RB26's, drop me a PM.

Price $7,500 (Authentication of Km’s available)

***Please save comments not related to the sale for the forum***

Link to comment
https://www.sau.com.au/forums/topic/63056-r34-rb26dett/
Share on other sites

I think thats a great price, surprised no ones got back to you about it.

I just rebuilt my RB25det for 8k (with mods), I would have loved to have got that engine from you :)

Link to comment
https://www.sau.com.au/forums/topic/63056-r34-rb26dett/#findComment-1189037
Share on other sites

Do you know the specs on the cams? Cause I have seen R32, 33 and 34 GTR cams and they are all exactly the same profile.

The engine is a refined version of the all powerful RB26DETT, performance has been boosted by the increase of 15.6kg-m/litre of engine torque, (this is the best per-litre figure of any domestically produced 6-cylinder engine displacing over 2.0 litres.) In comparison to the engine used in the R33 GT-R, the camshafts have been modified to improve valve timing, which has enabled the increase just mentioned.

You will also find that when you order any camshafts, the 32 & 33 have the same part numbers but the 34 has a different one meaning there not the same. :thankyou:

Link to comment
https://www.sau.com.au/forums/topic/63056-r34-rb26dett/#findComment-1197967
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...