Jump to content
SAU Community

Safc??

skyr31

By skyr31,
in Engines & Forced Induction

 Share

Recommended Posts

Timmy G Proficient

Timmy G

Posted
Posted

Don't forget the cost to dyno tune.

I speak completely from what I've heard - not exp. I haven't even got my 25T yet (13 days!!).

But it controls the sensors on your car and via that you can run lean (fuel economy) or rich (performance).

I have a Q on this topic.. does the Apexi Power FC do everything the SAFC does + more?

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-94765
Share on other sites
rev210 Grand Master

rev210

Posted
Posted
Originally posted by Timmy G

Don't forget the cost to dyno tune.

I speak completely from what I've heard - not exp.  I haven't even got my 25T yet (13 days!!).

But it controls the sensors on your car and via that you can run lean (fuel economy) or rich (performance).

I have a Q on this topic.. does the Apexi Power FC do everything the SAFC does + more?

Yes PFC does more.

There are quite a few threads that explore this topic that you might find interesting if you do a search. Have fun:)

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-94776
Share on other sites
Hicks Mentor

Hicks

Posted
Posted

Lean=Performance (but too much is dangerous)

Rich=No performance and smoke outta the exaust.

This is what your car will do with high boost and no computer.

This is deffinetly the next upgrade. Well worth the money, you can still use it with an after market turbo because you can also change injector sizes on it.

With about 13 pounds of boost you will have a big flat spot at about 5000 all the way up to bout 6500, this is when its running rich, s-afc fixes this.

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-94779
Share on other sites
Guest nismogtsx

Guest nismogtsx

Posted
Posted

I can only speak for my car... But before the manual and the S-AFC it cranked out 230rwkw's with a huge flat spot at 4500rpm and higher... Also the bosst used to do really weired things around the 5500rpm mark and drop away from there...

So i have had the manual fitted and a twin plate clutch... My computer was sent away to be chipped for the new 300zx AFM (as the original one died and this was the only possible conversion)... When it came back the car ran much better but was very rich... Plus the power level was a little low... So i bought a S-AFC and we got it on the dyno the other day and found it got to 327rwkw but then the clutch started slipping so its back in the workshop getting a twin plate fitted ATM... Once this is done we will dyno it again....

So for me i have spent thousands on the engine....

I was getting very average performnance and the S-AFC was able to solve all the problems... Cause if you got the right parts but their not tuned right then you may as well have sock bits....

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-95186
Share on other sites
Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted
Originally posted by benm

Sorry excuse my ignorance im a n00b but what is a S-AFC ? in basic terms pls, I hear about it alot.

It's a product from APEXi that alters the car's air/fuel ratio. It tricks the car into believing it's got more or less air to mix with the fuel.

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-95266
Share on other sites
franks Veteran

franks

Posted
Posted
Originally posted by nismogtsx

I can only speak for my car... But before the manual and the S-AFC it cranked out 230rwkw's...

So i have had the manual fitted and a twin plate clutch... My computer was sent away to be chipped for the new 300zx AFM (as the original one died and this was the only possible conversion)... When it came back the car ran much better but was very rich... Plus the power level was a little low... So i bought a S-AFC and we got it on the dyno the other day and found it got to 327rwkw...

thats close to a 100rwkw gain with an SAFC, rechipped ecu, manual conversion and a twin plate clutch?

WTF!? :eek:

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-95301
Share on other sites
Guest nismogtsx

Guest nismogtsx

Posted
Posted

Franks... what i was trying to say was i needed the S-AFC to make the whole package come together.... I have spend thousands on cams, turbo, honing, list goes on... injectors, fuel rail and pump.... BLAH BLAH BLAH

Finally with the AFM ratio's being controled i can get that power cause before it used to drop off after 4000rpm and then there was nothing.... So now it boosts and gains all the way to 7500rpm and smooth as a whissle too...

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-95317
Share on other sites
Guest nismogtsx

Guest nismogtsx

Posted
Posted

Have a look in the general section to discover my latest hassle which has left me devisitated and now i want to sell... NOT... But i have been with out my car for over 1 month now.... and still no sign on when it will be ready to drive.....

Title of topic is "Been with out my car for 1 month" or something like that. Check it out....

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-95318
Share on other sites
franks Veteran

franks

Posted
Posted

ahh ok. from wot you said it sounded as though the SAFC did all that on its own! :P now that you've cleared that up its quite obvious you have a *monster* !!!

understood. i'm getting my SAFC soon. im not expecting that much from it though. i dont think much power gains (although certainly alot has been experienced from members of this forum) can be made from just fuel trimming....

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-95343
Share on other sites
JimX Grand Master

JimX

Posted
Posted

I gained about 15kw and around 60Nm with my S-AFC tune. But even if I didn't get the extra power I would still appreciate the better fuel economy and power delivery. There used to be a big flat spot in my power curve from around 4000-6000rpm, so you can imagine how quickly I needed to react to change gears when flooring it as the thing just took off in the last 1000 revs up till redline. All I can say is thank god for rev limiters.

If you can afford a Power FC I would rather go with that, but if you can find a cheap S-AFC it is definitely a worthwhile investment to use while you save up for the Power FC. Anyone clued up on electronics can install it themselves (my advice - melt a portion of the ECU wire shielding and splice the new loom in directly rather than cutting the old wires and making new joins) and it'll cost about $140 to tune from a place like Hills Motorsport.

The S-AFC will also help prevent stalling if you have an atmo bov, so it also acts as a safety (and anti-embarrassment) feature in that regard.

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-96028
Share on other sites
  • 1 year later...
QuickR33Melb Rising Star

QuickR33Melb

Posted
Posted

If you want to talk air fuel computers and have a guy that knows the skyline scene back-to-front call Mike at True Vehicle Enhancements on 93805082.

Great guy and excellent prices. He is highflowing my turbo at the moment so the next step for me will be AFC of PowerFC. Oh thats if you live in Melbourne

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-741136
Share on other sites
NickR33 Grand Master

NickR33

Posted
Posted

In my humble opinion an aftermarket ecu that can be tuned on a dyno is one of the most important mods you can do... it allows good tuner to make the most of your other mods... otherwise your just burning wasted cash and fuel... and the SAFC also displays revs, knock, throttle, air flow etc while you drive and has a peak hold function...

and it looks all cool and sh!t...:spank:

Link to comment
https://www.sau.com.au/forums/topic/6309-safc/#findComment-741758
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...