Jump to content
SAU Community

Recommended Posts

hi, thanks to the guys that organised the day, was a great day!

had alot of fun, didn't break anything, brakes lasted well, tyres weren't as great as I hoped. The left hand front tyre took a hammering - might need to consider a shock upgrade/driver upgrade.

I would not recommend the Goodyear GSD3-F1s for a track tyre, great in the wet on the road but a bit too much give when cornering at high speed on the track.

If you havent been to a track day make sure you get out there and give it a go!

Stephen

Hey, just wondering what gears the other Skyline drivers were using.

Myself: Clubman track

5th at the end of the front straight (~170km/h at the end)

4th through the first long right hander (110km/h)

4th on the short straight (up to 130km/h)

3-4th through second long right hander (100km/h)

4th next straight (up to 140km/h)

3rd in sharp right 180 deg (down to 60km/h)

3rd right round the lefts then 4th into the second main straight.

4th end of secont main straight (150km/h)

3rd at the final right hand 180 deg onto the main (front) straight.

I think I was prolly using too high a gears, But I was trying not to hammer the car. I was also changing at around 5500 RPM.

What about everyone else?

Clubman circuit diagram attached.

R32 GTS4 - 5spd manual: Clubman track

4th at the end of the front straight (~160km/h at the end)- braking at end of concrete curbing on pit exit.

3rd through the first long right hander (130-140km/h)

3rd on the short straight (up to 140km/h)

3rd through second long right hander (130km/h)

3rd next straight (up to 140km/h)

2nd in sharp right 180 deg (down to 60km/h)

2nd into 1st left and 3rd just before the 2nd left then

4th 3/4 way down the second main straight (150km/h-160km/hr)

3rd just before final righthand ,

down to 2nd at the final right hand 180 deg onto the main (front) straight.

could have went faster thru 1st and 2nd long right hand corners with my old falkens but my new goodyear gsd3-f1s tyres were squirming their way out to the outer ripple strip. Tip - dont use these tyres on the track, too many exposed edges and flex in the tread, great on normal roads in the wet tho!,

I wasnt going to hammer the car, but once you get going and hear that awsome RB engine note at full song its hard not to hang onto those gears!.

Changing at about 6500-7000 rpm, way below the readline!...lol

Stephen

Changing at about 6500-7000 rpm, way below the readline!...

What is the redline on the R32 GTS4? It is 7000 rpm on the R33 GTST.

4th 3/4 way down the second main straight (150km/h-160km/hr)

Supprised you were getting up to 160 km/h down the back straight, I was only tipping 150km/h, I was using higher gears though.

3rd through the first long right hander (130-140km/h)

I thought I was going a bit slow through this corner but don't think I would have held 140km/h.

I am sure you are way past the peak of the torque curve at 7500 - 8000 rpm for a Stock RB25DET, the only thing your doing around that rpm is killing the engine.

I think you may have me mixed-up with another car, mine has a built RB26 engine with 2530s, HKS Step 2 cams etc, peak power is a bit under 8000 in mine.

What is the redline on the R32 GTS4? It is 7000 rpm on the R33 GTST..

should have used 'rev limiter' instead of redline but car will hit 8k without a prob.

Supprised you were getting up to 160 km/h down the back straight, I was only tipping 150km/h, I was using higher gears though..

I was coming out of left hander before this straight as hard as I could in 3rd gear. Keeping those corner speeds up helps alot of course when you hit the straights.

I thought I was going a bit slow through this corner but don't think I would have held 140km/h.

car has rb20 det and 4wd which helps a bit plus is a bit lighter than a r33.

I think you may have me mixed-up with another car, mine has a built RB26 engine with 2530s, HKS Step 2 cams etc, peak power is a bit under 8000 in mine.

Yeah that explains a few things, I assumed you were talking about a RB25DET.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...