Jump to content
SAU Community

Recommended Posts

running 2530's here on what believed to be an internally stock rb26 . I'd say on stock fuel system 1.0-1.1bar would be about the limit as injectors would really be maxing out . I'm running bosch 044 , 550cc inj , hks fuel rail , adjustable reg , im at roughly 75% duty cycle at 1.2bar .

i would think around one bar or so like 7heaven said you will soon know when you put it on the dyno and i would surgest you dont fit new turbos with out a dyno tune to check a/f ratios (as mine had problems at low throddle settings and needed a safc2 )

your next step will give you big gains ,but do it once ,and do it properly

thats if you choice to

as long as you have good turbo back exhaust and descent induction system

700cc injectors

Apexi pfc

rb20/25afm or z32 afms

well with this you can turn it up and the gains will blow you away

1.3bar should give 400rwhp (easily)and still be a reliable everyday driver and not worry the std internals

this is only my opinion cheers

When I had stock pump and 550cc injectors, the car would only run 1bar before running out of fuel.

Now have GTR pump in tank to 2L surge tank, Bosch 044 from surge tank to rail and Sard 700cc injectors. We have cranked over 1.5 bar through it and its still not coming near the limits of the new pump + injectors.

I'm aware of what there capable of together with an upgraded fuel sys. But im interested to know what power at what boost they can make (safely) on a stock rb26 fuel sys.

When I had stock pump and 550cc injectors, the car would only run 1bar before running out of fuel.

Now have GTR pump in tank to 2L surge tank, Bosch 044 from surge tank to rail and Sard 700cc injectors. We have cranked over 1.5 bar through it and its still not coming near the limits of the new pump + injectors.

HI guys,

Has anyone upgraded to 2530's on a rb26 (stock fuel system/ecu).

What is the most boost you can run before needing to upgrade fuel system/ecu?

HP?

well i'll think most people wont try to run larger turbos without upgrading ecu or atleast trying to compensate for them ,as you could well run into the problem i had with bad air/fuel ratios ,have the car dynoed after install to check a/f and if your a r32 gtr you might be able to remap the ecu.

best guess

hp=mid 300rwhps(to maybe high 300 if your lucky)

boost=1 to 1.2 bar

will all depend on your a/f ratios and ability to tune them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...