Jump to content
SAU Community

Recommended Posts

Sup Guys

I just wanted an idea as to what air filters you's are using on your "line's" i been told apexi is prolly one of the best if not the best and i have seen on tests that this is true but i still don't believe it what yall think i was thinkin in terms of the trust airinx or blitz sus filter

i dun wanna spend more then 350

thanx

adrian

Link to comment
https://www.sau.com.au/forums/topic/6373-which-air-filter-to-use/
Share on other sites

Keep away from foam and oil filters as they can reduce the life of your air flow meter. The Blitz is good if it has a good base plate. Don't forget the K&N stuff.. it's also cheaper.

You should've posted this in the aus mainatiance section.. you would have got more resposes.

The Blitz has the worst filtration. The HKS has the worst flow and the 2nd worst filtration. Go the K&N (IMHO).

I've heard from a very good source that certain cheap cotton/oil pod filters made in 3rd world countries are able to make more power than any other filter. Able to make more power than even an open pipe! Don't have any brand names, but they're the style that have a funnel shaped opening on the end. Don't believe me? Ask SST.

yeah thats the thing

that website taka kaira is selling tha trust airinx for 145.00 aussie dollars and it'll be bout 40-50 bucks for freight in tha end only cost max $210 when i asked round perth for one i was quoted at like 350-400 dollars

its either apexi or trust

i have nuthin against kn it's just i personally dun like em

Grandenko's right.

I put one of these "Apexi" copies on my old S15 and tried it against 2 other brands on SSTs dyno. The cheaper one actually made more power than the open pipe!

I've still got it at home and you can try it out for nought if you want to wait until mid December when I get back to Perth.

I typed almost the same thing in the other air filter thread,

APEXi - Evolution R, speak to Mao, about $160 bolts on, small little thing, sounds fantastic, takes about 10 mins to install if not less. just make sure you remember that the air flow meter bolts on the outside of the air box, not the ones on the inside, they are welded on nuts. heres me spraying that loosening stuff on a welded on bolt, should have unbolted the AFM to begin with , lol

laters

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
    • wow, a completely stock GTR! I've got to admit, I have no idea from what you are describing....do you have  any idea where the "thump" comes from, and are you certain it is the HICAS light not something else like the cat overheat light?
    • nice work, welcome to the world of CAD! fabricating accurately in 3 dimensional space is beyond me....I almost always end up making something more than once...sorry I mean I extensively use prototyping
×
×
  • Create New...