Jump to content
SAU Community

Recommended Posts

15 Year Rule KILLED -- 7th February 2005

A Media Release today by the Minister for Local Government, Territories and Roads, the HON. JIM LLOYD MP, spells the effective death of the 15 year rule as we know it. This is reproduced below for your information. In essence, from today 7th Feb 2005, only 1988 and older vehicles can be imported under the 15 year rule. This will be gradually increased to 30 years over time.

All other vehicles for road use must be imported under SEVS. Anyone who can prove a financial commitment to a 1989 or 1990 vehicle prior to today's announcement will be exempted from the changes and will still be entitled to an Import Approval once the vehicle is 15 years old.

The statement mentions "a level playing field", obviously to the Australian Govt. this involves sheltering our small and uneconomical local market from imports by grossly and unfairly restricting what is allowed in after conducting limited community / industry consultation. Not sure what happened to free trade or a fair go in this case. And this is after setting up SEVS as a means to control the import numbers of a restricted selection of vehicles, leading to less consumer choice and much higher prices.

If you have any comments about the changes please direct these to the contact points shown at the end of the statement.

---------------------------------

L11/05

Monday February 7 2005

MINISTER ANNOUNCES CLOSURE OF CAR IMPORT LOOPHOLE

A plan to tighten Australia’s vehicle importation laws that will reinforce motor vehicle safety and emission standards was announced today by the Minister for Local Government, Territories and Roads, Jim Lloyd.

“The Government is closing a loophole that has enabled mainstream cars over 15 years of age to be imported in commercial quantities, and not subjected to safety and emission certification,” Mr Lloyd said.

“Importers of these cars were using an exemption that allows hobbyists and enthusiasts to import classic and historic cars. This exemption exists as these vehicles generally perform low mileages and are limited in numbers, and therefore represent a minimal risk to overall Australian vehicle and safety goals.

“Without such an exemption, the private importation of these types of older, collectible cars would become uneconomic.

“The closure of this loophole will only apply to those vehicles which do not fit in the classic and historic category, thus preserving the ability of hobbyists and enthusiasts to obtain older classic cars and historic vehicles.”

Mr Lloyd said a transitional arrangement would be provided for other vehicle importers who had current commitments to bring in vehicles under the old rule.

“The changeover is being introduced gradually, to allow importers and consumers time to react to the revised focus of the exemption,” Mr Lloyd said.

Under the new rule:

Vehicles manufactured before 1 January 1989 may be imported without restriction.

Vehicles built during 1989 (or later) will need to qualify under the Registered Automotive Workshop Scheme (RAWS) and will need to be certified as complying with Australian Design Rules (applicable at the date of manufacture). To qualify under RAWS, vehicle models must meet the specialist and enthusiast criteria.

The buffer period (between collectible vehicles and mainstream vehicles) will be gradually extended over time – up to a maximum of 30 years.

A transitional arrangement will also be established. Those importers who have already made a financial commitment before today on a vehicle manufactured in 1990 intended for future import, will be allowed to bring the vehicle into the country under the old rule up to the end of December 2005.

“This new rule will re‑instate a ‘level playing field’ within the industry. Vehicles supplied to the same market will be subject to the same regulatory environment, substantially reducing cost pressures on mainstream businesses,” Mr Lloyd said.

Media inquiries:

Mr Lloyd’s office: Fiona Telford 02 6277 7060

Technical inquiries:

Department of Transport and Regional Services: Justin Bryan 02 6274 7426

Link to comment
https://www.sau.com.au/forums/topic/63833-latest-on-the-15year-rule/
Share on other sites

so no 15 years old cheap car anymore, it might be a good thing.

hence those "16 year old" will not able to afford an import anymore.

except the purschase price, the new rule might actually strength up the price of import, which had been affect quite a bit by those 15 yr old lately.

Pure gayness... The reason I wanted a skyline is because there wasn't any car that appeal to me from aus dealers. On the day I am about to auction for a fully sick '99 R34 GTT (with enough mods to tear the road up), which I could get for less than $30k on road. I was told that stupid SEVS thing was in place, and no one in Adelaide can(or want to?) do the compliancing.

So I was fcuked... and bought my R33 for $25k in Dec 2003

Now they changed again..... why don't they bring out better cars... instead of fcuking with import regulations...

That's their business. The government bring this crap out because car dealers here can't make enough money. "Grand Turismo" had to shut down before I got my car. I think motorcity is on a death march now. Don't know about redline though... haven't been past there for ages.

Sigh....

If it means the local manufacturers will make millions of dollars more, I guess the government is fine with small businesses going bust.

I swear the people in government have shit for brains.

The people who buy imports wouldn't spend that money on a new local car anyway. Example, someone who buys a 15k GTR... what can they get new for that.. a Hyundai Getz?

No way a person who wants a GTR will buy a Getz.

Their only other option would be a WRX/Monaro/350z etc... sorry, but not everyone has 40k+ to spend on a performance car.

Their whole reason for doing this is because of competition and also to get older environment unfriendly cars off the road... So I guess what they're saying is they'd rather people buy 20 year old V8 commodores as opposed to more efficient 2L 4cylinders from Japan which not only are cleaner, but are better quality.

Sigh... And do you think there's anything we can do about it... as if :mad:

And then they mention something about a 30 year rule in the future... wtf is up with that?!?!

What happens to all the people who have a business with an income that is solely from importing with the 15 year rule.. i.e. John Verban?

Stiff shit.....shouldn't have based his business on flimsy laws.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...