Jump to content
SAU Community

Selling the mighty 4 doorz

4 Doorz

By 4 Doorz,
in Queensland

 Share

Recommended Posts

4 Doorz Rising Star

4 Doorz

Posted
Posted

I am thinking about selling my R33 4 door to help with a deposit on a house. As I haven't been on the market for over 18 months I have no idea how much they are going for. I was wondering if you more connect peeps could give a suggestion of a reasonable price :-)

It's 1993 R33 Manual 4 door

with exhaust, I/C, Stage 1 GCG turbo, Apexi Power FC + boost controller + hand controller, slotted rotors, bilstein dampers and springs with caster and camber kits (12,000km), strut brace, heavy duty single plate clutch, Kaaz mech diff, Nismo fuel pump, Trust Oil Cooler, Adjustable Cam pulleys, new (only 1000km) slotted rotors with new pads, 18in wheels, etc. It's been serviced every 5000km at Gavin Wood Auto Tech who a lot of you guys would know and trust. It's got roughly 116,000km

It ran a 12.9 1/4 mile at Willowbank before I had the turbo changed about 12,000km ago - since then it's just been a car to drive the wife around (otherwise I am on my GSXR).

Basically it's a complete car which has been looked after and it's being sold as priorities in life has changed. I guess being a 4 door manual adds some sort of exclusivity to it ;)

So if any of you could suggest a price, or know anyone who is looking and wants to make an offer, I'd be more than grateful!!

4 doorz

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • r32-25t
      Bolt dress up kit

      By r32-25t · Posted

      They sell them in Malaysia for about $4
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...