Jump to content
SAU Community

Lets have a big Ass cruise to the gong! 14/12/02 MEETING SPOT CHANGED!


Recommended Posts

  • Replies 122
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Mr GTS

I Would like to come, but I need to know some more info abt the cruze, if something can let me know would be great!!

Pretty much meeting up around 10:30-11am at carpark 6C at homebushing cruising down to the gong via the nasho get some food and stuff down there and **** around abit then cruise back up :D

Originally posted by ultim8DTM5

ive organised a few barinas to come along (dates are the same, haha) so we are meeting up at 6C as well

:D

except we are meeting up pretty early, like 10ish

ive been informed that rumba is on the same day at the stadium...could make things a bit, ahem, packed?

rumba

hehehe

imagine all the 12yos you will be impressing

:band: :headbang: :rave:

Originally posted by kabab

Pretty much meeting up around 10:30-11am at carpark 6C at homebushing cruising down to the gong via the nasho get some food and stuff down there and **** around abit then cruise back up :D

Thanks Kabab.

Will try and get there, how many numbers so far?

kabab,

I might come for the first time but it all depends how long the engineer takes with my car, a drive to the gong would be good chance to run in the engine. By the way I take it that this is a am meet not pm???

Sorry Fellas - I'm out - No car. It's still in the Workshop - The ppl who were smoothing the inside of the plenum with that paste stuff haven't completed the work they were meant to. Everything else is OK tho. So should have my baby back on Monday.

Have fun ppl.




  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...