Jump to content
SAU Community

Recommended Posts

As said before i made 225rwkw at 16psi boost. It was my first time at the runs and only like the third or fourth night id taken my car out since modifying it, so im still not used to the launch.

Anyway 3 out of the 4 runs I had I got in the 13.1 bracket. My final run i was spewing my third wouldnt go in and i was driving the best!!!!!!

Best Time:=

60' 2.175

330' 5.741

660' 8.605

mph 86.82

1000' 11.077

ET 13.142

MPH 106.44

KM/h 171.3

Final Run (Missing third)"=

60' 1.948

330' 5.478

660' 8.632

mph 81.06

1000' 11.206

ET 13.342

MPH 103.02

KM/h 165.79

Im pleased with the results but what time do you reckon i could of got if I didint miss third according to my 60ft etc?

Link to comment
https://www.sau.com.au/forums/topic/65587-my-results-first-time-at-runs/
Share on other sites

if you hadn't missed third and managed the same trap speed as the other 13.1 run, with the 1.9 60" time.. you might have got a 13.00 or possibly just in to a 12.99 area.

what wheels/tyres?

how much tyre pressure did you have?

what suspension?

16psi boost? what turbo?

nice work for your first outing..

will get much better as you get used to it

Hey dude, i was next to you in the 13.1 run. Not fair you got more boost than me :(

What car where you in what time did u get?

Ive got 17inch mag wheels on my car and i put the back to 20psi and front i left basically normal. My cars got cut springs, i wana buy sum pineapples but im scared it might slow me down.

Yee ive got a gcg hi flow so my car spools up quickly, but i found my car went the quickest when i got a bit of wheelspin other times i tried not to wheel spin.

What car where you in what time did u get?

Ive got 17inch mag wheels on my car and i put the back to 20psi and front i left basically normal. My cars got cut springs, i wana buy sum pineapples but im scared it might slow me down.

Yee ive got a gcg hi flow so my car spools up quickly, but i found my car went the quickest when i got a bit of wheelspin other times i tried not to wheel spin.

I was in the rexy wagon dude, i think i got like 13.8 when i ran you.

I sure did'nt expect you to pull away hehe.

When you going next? i might pose more of a threat then :(

Nice going there man. It takes quite a bit of practice to get the most outta your car on the 1/4 with a manual car.. My 60fts are always 2.4 so I need more practice..

Make sure you get a 12 next time you head out :)

yeee i hope i get a 12 nxt time jst keep my 60 ft down.

bmxwrx: Im going back in couple of weeks coz my mates taking his xr6t in for mods. He ran a 14.3 in auto last night and wana see the difference after the mods. Your cars a sleeper looks stock standard what have you done to it? Im hoping to do a few little mods before i go out next, suspension etc.

yeee i hope i get a 12 nxt time jst keep my 60 ft down.

bmxwrx: Im going back in couple of weeks coz my mates taking his xr6t in for mods. He ran a 14.3 in auto last night and wana see the difference after the mods. Your cars a sleeper looks stock standard what have you done to it? Im hoping to do a few little mods before i go out next, suspension etc.

I'm running untuned atm with bigger turbo, top mount cooler and 3" zaust. Getting tuned soon, so next time i hope to be in the 12's with ya, gotta get a good jump tho :D providing my clutch is still good for it hehe

Was 14.3 stock for a xr6t? Those whales can get moving real fast once fiddled with, i'm sure you'll find out soon too.

Let me know when you going next dude, we'll have a chat next time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
    • wow, a completely stock GTR! I've got to admit, I have no idea from what you are describing....do you have  any idea where the "thump" comes from, and are you certain it is the HICAS light not something else like the cat overheat light?
    • nice work, welcome to the world of CAD! fabricating accurately in 3 dimensional space is beyond me....I almost always end up making something more than once...sorry I mean I extensively use prototyping
×
×
  • Create New...