Jump to content
SAU Community

Recommended Posts

As said before i made 225rwkw at 16psi boost. It was my first time at the runs and only like the third or fourth night id taken my car out since modifying it, so im still not used to the launch.

Anyway 3 out of the 4 runs I had I got in the 13.1 bracket. My final run i was spewing my third wouldnt go in and i was driving the best!!!!!!

Best Time:=

60' 2.175

330' 5.741

660' 8.605

mph 86.82

1000' 11.077

ET 13.142

MPH 106.44

KM/h 171.3

Final Run (Missing third)"=

60' 1.948

330' 5.478

660' 8.632

mph 81.06

1000' 11.206

ET 13.342

MPH 103.02

KM/h 165.79

Im pleased with the results but what time do you reckon i could of got if I didint miss third according to my 60ft etc?

Link to comment
https://www.sau.com.au/forums/topic/65587-my-results-first-time-at-runs/
Share on other sites

if you hadn't missed third and managed the same trap speed as the other 13.1 run, with the 1.9 60" time.. you might have got a 13.00 or possibly just in to a 12.99 area.

what wheels/tyres?

how much tyre pressure did you have?

what suspension?

16psi boost? what turbo?

nice work for your first outing..

will get much better as you get used to it

Hey dude, i was next to you in the 13.1 run. Not fair you got more boost than me :(

What car where you in what time did u get?

Ive got 17inch mag wheels on my car and i put the back to 20psi and front i left basically normal. My cars got cut springs, i wana buy sum pineapples but im scared it might slow me down.

Yee ive got a gcg hi flow so my car spools up quickly, but i found my car went the quickest when i got a bit of wheelspin other times i tried not to wheel spin.

What car where you in what time did u get?

Ive got 17inch mag wheels on my car and i put the back to 20psi and front i left basically normal. My cars got cut springs, i wana buy sum pineapples but im scared it might slow me down.

Yee ive got a gcg hi flow so my car spools up quickly, but i found my car went the quickest when i got a bit of wheelspin other times i tried not to wheel spin.

I was in the rexy wagon dude, i think i got like 13.8 when i ran you.

I sure did'nt expect you to pull away hehe.

When you going next? i might pose more of a threat then :(

Nice going there man. It takes quite a bit of practice to get the most outta your car on the 1/4 with a manual car.. My 60fts are always 2.4 so I need more practice..

Make sure you get a 12 next time you head out :)

yeee i hope i get a 12 nxt time jst keep my 60 ft down.

bmxwrx: Im going back in couple of weeks coz my mates taking his xr6t in for mods. He ran a 14.3 in auto last night and wana see the difference after the mods. Your cars a sleeper looks stock standard what have you done to it? Im hoping to do a few little mods before i go out next, suspension etc.

yeee i hope i get a 12 nxt time jst keep my 60 ft down.

bmxwrx: Im going back in couple of weeks coz my mates taking his xr6t in for mods. He ran a 14.3 in auto last night and wana see the difference after the mods. Your cars a sleeper looks stock standard what have you done to it? Im hoping to do a few little mods before i go out next, suspension etc.

I'm running untuned atm with bigger turbo, top mount cooler and 3" zaust. Getting tuned soon, so next time i hope to be in the 12's with ya, gotta get a good jump tho :D providing my clutch is still good for it hehe

Was 14.3 stock for a xr6t? Those whales can get moving real fast once fiddled with, i'm sure you'll find out soon too.

Let me know when you going next dude, we'll have a chat next time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...