Jump to content
SAU Community

compliance plates

halifax
 Share

Recommended Posts

slow13dude Rising Star

slow13dude

Posted
Posted

Depends on the compliance scheme.

If 15 year rule, then it just has to be engineered with things like seatbelts and mirrors changed and side intrusion bars. It's pretty forgiving.

If SEVS, then it has to be returned to factory standard, which probably means you have to have the front panels and light array removed and replaced with the 180SX lights.

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah, that is a very rough description of a compliance plate. the plate basically states that the car now meets the applicable Australian Design Rules.

Regarding the Sil80, it is simply a 180sx with some body modifications. however if you are planning to import one under the new SEVS you may find it not viable us under that scheme only standard cars may be complied. Best bet is to speak to a RAW (listed on the DOTARS site) and ask them what your options are for importing one. FYI there is a factory nissan version of the sileighty made in 1996 or '95 if memory serve me correctly. Not many of them made though and they would be comparitively expensive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • V35_Paul
      Could it really happen......

      By V35_Paul · Posted

      Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...