Jump to content
SAU Community

Recommended Posts

I used to have the same problem back in winter but now it just doesnt work at all. :drooling:

One mechanic also suggested that it could be a fine crack in a solder on the back of the cluster. It expands and contracts with different temperatures and this is why it only works sometimes :confused:

Apparantly this happens because they have been wound back by the dealer. :)

Sorry mate never done it but I watched a bloke do it once.

Carefully remove the plastic face that goes around your instrument cluster / stereo / ash tray area. It pops out but it looks very fragile so be carefull.

I think there is some screws that secure the gauge cluster. undo those and remove the entire cluster. Once the cluster has been removed you can access the circuit tape behind it.

Undo clips on clear plastic front of cluster to access the front of the gauges(needles, screws etc...)

Do the opposite to re-install.

You should run a search on the forum for more info aswell....

Good luck

:)

Had same problem with one of my dashes, took it out and went to Miranda Instruments (Sydney) and they repair and bench test it, cost about $100. The fine tracks or solder joints on the back break, and basically they go thru and fix any bad joints or tracks.

Is it an R33 or R32.

R32 is cable driven.

R33 is electric.

If its electric probally a dry solder joint or cracked tracking on the back of the cluster.

If its mechanical i would say the plastic teeth are crapped and will need repair by instrument specialist.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
  • Create New...