Jump to content
SAU Community

Recommended Posts

Last night I was driving normally and then came up to a hill and said what the heck and felt like giving it a good thrash. Anyway I reved my car and dumped the clutch but a few secs after moving I was like wtf why isnt my wheels spinning and the cars moving. I tried to push in my clutch as I was coming to a stop sign and realised my clutch was all the way stuck at the bottom!! Only other time ive felt this is when my clutch cable snapped on my civic. I couldnt put my car into gear for bout 1 minute then it jst popped out and was normal again??? Only thing is my clutch feels a bit softer and i cooked it harddddd!! The clutch smelt all the way home and when my car was in the garage the smell was there for at least an hour.

Did i wear out my clutch alot just then? And why would the clutch stick to the floor????

Link to comment
https://www.sau.com.au/forums/topic/66122-weird-clutch-problem-info-plz/
Share on other sites

with your pedal stuck to the ground, this sounds like a hydraulic problem (master cylinder or slave cylinder or both). Yes other cars use a cable clutch but skyline uses hydraulic.

To get your master cylinder reconditioned with new seals and stainless steel sleeve if needed is about 70-100 per cylinder. Mechanic can do this for you or you can give it a go yourself, i tried it myself and ended up stuffing up the master cylinder again so for $200 or so save the hassle and let a mechanic get it going for you.

With the clutch - any idea on the wear on it? is it new? old? due for replacement?

I had the same problem in my daily driver ( aus R31 ) about 3 months ago although I wasnt caining it. Just driving along and all of a sudden the pedal went to the floor.

Stuck my foot under it and popped it back up.

Never had a problem and it hasnt happened since.

yeah dude, i had same prob in r33 gtst. Went to do burnout with some mates in the car, revved, dumped clutch and car didn't move at all just revved like shit. Went to put clutch in and realised it was still stuck all the way down. Same thing, just popped out after a few secs and smelled like shit. Clutch then started taking heaps far out. That was a few months ago and i've been nice to it since. Still i think the clutch is gone and probably a hydraulic problem.

Let us know what yours turns out to be man

Cheers

He means the clutch wont engage or grab until the peddle is almost out at its furthest point.

Check your clutch fluid level.

I had the same problem in one of my Integras, it was the clutch master cylinder..

Yeah my friend had a similar problem with his DCR2, but his clutch has done 100,000+! so its due for replacement, anyways he couldn't put it into gear, then we got it checked,

the clutch fluid was low, they topped it up, no problem since and his still driving dunno how the hell the clutch is lasting so long for him, he drives CRAZY!

Kriminal this happened to me 2 nights ago. My car is still off the road and had my mechanic have a quick look at it at home (didnt jack up the car), he said possibly the clutch fork is bent broken or out of place, or maybe the pressure plate has collapsed

did something the same went to pop it and then found that I couldnt select gears (no clutch) waited for it to cool, no good, I had to drive home with no clutch so learnt to match rev quick. Found problem to be that pressure plate weled its self. Came unstuck with some help from 2nd gear

Last night I was driving normally and then came up to a hill and said what the heck and felt like giving it a good thrash. Anyway I reved my car and dumped the clutch but a few secs after moving I was like wtf why isnt my wheels spinning and the cars moving. I tried to push in my clutch as I was coming to a stop sign and realised my clutch was all the way stuck at the bottom!! Only other time ive felt this is when my clutch cable snapped on my civic. I couldnt put my car into gear for bout 1 minute then it jst popped out and was normal again??? Only thing is my clutch feels a bit softer and i cooked it harddddd!! The clutch smelt all the way home and when my car was in the garage the smell was there for at least an hour.

Did i wear out my clutch alot just then? And why would the clutch stick to the floor????

Yepo, this happened to me only 3 weeks ago..

Took car to mechanic, 2 things were wrong..

1) I had a tiny slit in the rubber connect hose from clutch cylinder to master cylinder pipe..that needed replacing $15....(situated under car, under drivers seat)

2)the actual steel pipe that holds the clutch fluid from master cylinder (under the hood) down along firewall to the slave cylinder, under the car was not in the master cylinder far enought therefore, air was getting in under pressure, therefore clutch went floppy...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...