Jump to content
SAU Community

R33-650hp turbo/microtech setup (Vic) REPOST

ABuSD
 Share

Recommended Posts

ABuSD Veteran

ABuSD

Posted
Posted

Hey guys due to getting stuffed around for hat seemed an eternity i have to sell my turbo setup AGAIN, all as a package:

- Garrett GT3540 Ball Bearing Turbo - 700hp capable (made in japan)

(Came with .82 exhaust housing, but ive changed it with a .63, for no lag, so its probably now a 650hp capable turbo??)

- Turbosmart 45mm progate (external wastegate)

- 3" stainless steel dump/front pipe to catalytic converter

- Stainless steel screamer pipe for the wastegate

- Front custom size air Filter pipe [(stainless i think)(to suit apexi POD)]

- Front housing to cooler pipe(stainless i think)

- Braided lines for oil and water

- Microtech LT-8 Computer (inc instruction manual)

ok these all came off an R33 Rb25det, the turbo exhaust manifold has been modified slightly to fit straight onto standard R33 exhaust manifold so no need to buy exhaust manifold, the wastegate has been tapped into the rear housing so no need for manifold. (but as i have changed the rear housing, u have to mount the wastegate elsewhere, may be able to supply adaptor plates also).

The pipes included are 3" stainless steel for back of turbo to cat, the pipe for the air filter and the pipe for the front housing to cooler as this is slighlt different shape to standard.

the air filter pipe was customed to fit apexi POD filter.

the microtech LT-8 is also supplied in excellent condition.

This was never fitted to my car, but fitted on previous owners car it has done 5000kms and is in excellent condition with no oil anywhere. Believe me its got some serious balls and that wastegate will scare the pants of most drivers. The exhaust housing is new, so basically your buying a half new turbo!!!!

This conversion is all you need for an R33 rb25det, basically bolt on turbo and exhaust, wire in the microtech and go get it tuned.

I am looking for $3000 for the lot or

$2600 for turbo setup

$600 for microtech

this is cheap considering the price of the turbo alone, and its half new!!

i will take the first best genuine offer so get in quick.

  • 4 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...