Jump to content
SAU Community

Recommended Posts

In NSW these days you can get up to 650cc on your L's/P's, depending on the power to weight ratio. CBR's and other sporty bikes are hard to learn on, and its even difficult to complete the P's test at the RTA as they don't have that great a turning circle.

If you have never ridden before, I would recommend a dirt bike to begin on. As said by Lepperfish, you can get used to the in the dirt, they have a easy/upright riding position and are easy to control at slow speeds. Also if you drop a dirt bike, it isn't going to damage it as much as a nice new road bike.

I did my NSW L's in 2002. I had never ridden before, around 6yrs driving cars. First bike was a ZZR250. Second bike was a ZXR750 L2. I rode the ZXR250 and CBR250RR.

The ZXR250 was much more responsive than the ZZR, very quick and braked well, and both are uncomfortable after an hour and a bit. The difference between the ZXR and the CBR is much of a muchness, ie. stuff all.

The guys that said the Kawasaki is just wider have hit the nail on the head. You won't have any dramas learning on either of the bikes. Just like when you bought your R33, you just have to use the throttle in proportion to your ability and experience. There are guys here that learned to drive in a GTSt.

Boj01 said that the sports bikes suck when doing the P's test. He is 100% spot on. Rent a CB250.

:) Enjoy bikes, they are awesome. I've never felt the same feeling of speed and fragility as I did on my bike. Then you can join the club of riders that insist on referring to cars as 'cages'. :(

Mark

mmm glad someone brought up bikes :(. Brings back memory's of riding every single weekend. I agree with some of the others, learn to ride up the bush or even in some's paddock. I learnt on my CR 80 and i crashed way to many times and suffered almost as many injuries and thats with just trees and the ground to hit. Hell, even spend 500 bucks on a piece of Shyt trail bike and thrash it till it dies. The skills u learn could safe your life.

o and id go the cbr250rr

once you get a bike every other car seems slow (hehe maybe not all)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...