Jump to content
SAU Community

Recommended Posts

G'day guys

I am planning to buy cefiro in the future, but there are something bothering me.

I want to have better brakes and better grip.

At the moment I have aftermarket wheels off skyline with 5 stud. I really love the wheels and I would like to use them on my future cefiro.

Will the hub from s14 200 sx fit cefiro? or as s14 have 4 pot brake will the whole stub axle and hub unit of s14 200sx fit to cefiro strut and control arm?

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/66294-5-stud-wheel-pattern-on-cefiro/
Share on other sites

Id you want to use the S14 or S15 hubs you will need to get the lower control arm (should still be attached - much easier this way). This bolts straight up to the Cefiro mounts. Cefiro shocks will bolt straight on also, as will the caliper (der, its on the hub). Simple!

JK

You can also use moog ball joint. And just buy the spindle and hubs and caliper and brakes.

i am trying to sell mine as I bought the ball joints and the hubs off a s14, but only ended up using 1 hub and still have both spindles, ball joints, and the calipers and rotors, and 1 hub.

If you want em make an offer

here is a site to check out.

http://www.pdm-racing.com/products/5boltco...conversion.html

if the stock ones are stock S13 brakes which im sure they were, then couldnt u just do the upgrade pack from g-13 garage?? its like 800 or something for R33 brakes

www.garage-13.com

Speak to Alex... hes a bit of a space cadet but hes alright :rofl:

if the stock ones are stock S13 brakes which im sure they were, then couldnt u just do the upgrade pack from g-13 garage?? its like 800 or something for R33 brakes

www.garage-13.com

Speak to Alex... hes a bit of a space cadet but hes alright :rofl:

I emailed them 2 months ago about this, and a locker diff... Still haven't heard back. I'm sure their busy.. But not to hear anything back kinda annoyed me.

Can any one confirm the email address on the site is still correct?

I know that I can buy the adaptor for using r33 brakes but I want 5 stud as well as I want to use my old wheels (Volk TE-37 off my R33), I'd fallen in love with those wheels.

However I am not sure if the skyline hub will fit to the cefiro stub axle, so I need the information from you guys about this. If they fit it would be sweet.

I don't want to use the stud adaptor considering the safety.

yeah the hub from a skyline wont fit on the s13 spindle, you need to get new spindles, and I am not sure if the offset is going to be right if you try and bolt on skyline brake and spindles???

You got to go either S14, or buy upgrade hubs, which you can buy but very expensive, I had a look and decided not to as you only really temporarily fixing the problem.

As I said I have got all you need for s14 front except for 1 hub if you wanna buy, and I dont want much cash for them.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...