Jump to content
SAU Community

Recommended Posts

my head unit wont fire up. I checked the fuses, there fine. Pulled the unit out and reconnected it and nothing, so i thought maybe the unit may of had it...

ripped the headunit out of the mrs' car and still no fire. Also my little clock on the dash isnt working either??? everything else on the dash worx tho

Link to comment
https://www.sau.com.au/forums/topic/66380-dead-head-unit/
Share on other sites

i bought a multi meter thingy today too see if there was any current going into the ignition and power wires for my headunit and it showed no charge for all the wires behind the headunit. I checked the fuses and they all seem ok.

How can i run my headunit so it has power but turns off when i turn the car off?

Link to comment
https://www.sau.com.au/forums/topic/66380-dead-head-unit/#findComment-1237712
Share on other sites

i bought a multi meter thingy today too see if there was any current going into the ignition and power wires for my headunit and it showed no charge for all the wires behind the headunit. I checked the fuses and they all seem ok.

How can i run my headunit so it has power but turns off when i turn the car off?

Dude you have to make sure that have 3 wires from the head unit:

+Constant (Norm. yellow or orange)

+Acc (Norm. Red)

-Negitive (Norm. Black)

but you also have to have them from the loom of your car behind the head unit.

if you have a multimeter it is easy, always keep the -Negitive prong (lead) of the multimeter on some part of the chasis of the car and then test with the +Red prong (lead)

when the ign is off you will fine one of the wires will always have a voltage (12v) that will be your Constant (Yellow or orange)

then you have you try differant wires whilst turning the ing on and of to find the ACC wire in the loom.

meh if you can undestand that go here: The12Volt.com

Link to comment
https://www.sau.com.au/forums/topic/66380-dead-head-unit/#findComment-1240608
Share on other sites

Dude you have to make sure that have 3 wires from the head unit:

+Constant (Norm. yellow or orange)

+Acc (Norm. Red)

-Negitive (Norm. Black)

when the ign is off you will fine one of the wires will always have a voltage (12v) that will be your Constant (Yellow or orange)

then you have you try differant wires  whilst turning the ing on and of to find the ACC wire in the loom.

if u get this the wrong way around then your memory wont stay in your headunit and the cd will begin form the beginning eachtime u turn ignition on.

are your parkers/brake lights working?? if so then uve connected the ground to the parkers instead of ground (i learnt this the hard way)

if your clocks not working then u must've blown a fuse... i think the parkers fuse is in the engine bay... but the clock fuse is in the car.

Link to comment
https://www.sau.com.au/forums/topic/66380-dead-head-unit/#findComment-1240638
Share on other sites

my head unit wont fire up. I checked the fuses, there fine. Pulled the unit out and reconnected it and nothing, so i thought maybe the unit may of had it...

ripped the headunit out of the mrs' car and still no fire. Also my little clock on the dash isnt working either??? everything else on the dash worx tho

I worked in a Car stereo shop for about 3 + years and It sounds like a fuse is blown.. I know you said you checked them but Id check them again.

80% of the time if your clock goes and your radio then they are on the same line.. Check if your interior light is working aswell.

Just my 2c Worth.

Cheers :headspin:

Link to comment
https://www.sau.com.au/forums/topic/66380-dead-head-unit/#findComment-1240970
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...