Jump to content
SAU Community

Recommended Posts

I had a small prang today....not happy :bs!:

Anyway, my bonnet suffered most of the brunt of accident. Its golt a slight fold halfway in it, and the front part is crumpled.

I need either :

a) a cheap r32 Gtst bonnet (preferably in black)

B) a fibreglass Gtst or GTR bonnet.

c) a GTR bonnet.

If i go for the GTR style i obviously need the latch / front grille etc....

So, if anyone knows someone with any of the above, please send me a pm or email.

:P

Link to comment
https://www.sau.com.au/forums/topic/66397-i-need-a-r32-bonnet-help/
Share on other sites

yer, just hoping someone in SA had upgraded to a cf/aftermarket one, and has their old one lying around i could grab....

Good news is that their isnt any damage to the radiator support. Just the passenger side light pushed in a little...only cosmetic damage.

GTR bonnet goes on same as GTS, you'll need the catch of a GTR for it to fit though, other than that it all bolts up no probs

Mine is in next week for the fuel pump and tuning, hopefully back up to 200-210rwkw

My grill had two of the original clips on there, the other two are cable ties, as Clint says, your lights should have two tabs on each side to attach the grill to, it fits no probs

Latch is a hard one, but you need the latch as well as the support (the bracket from the radiator support that the latch bolts to) Most people end up going with bonnet pins, as these parts are very hard to find. Unley Nissan may be able to source new parts?

I was very lucky with mine, as it was from a un-damaged front cut, so everything was nice and straight.

Maybe try calling a few of the well known wreckers interstate? I will take a few pics of mine if you want, perhaps you could modify the original parts?

If the gtr bonnet falls thru then let me know, i have the one with blistered paint that you are welcome to. Just pay postage. Will need to get it painted of course...my new cf bonnet will be arriving soon i hope, dependign on how it looks i might be wantign to sell it just for a GTR alloy bonnet as im going to get it colour coded.

And Chris, im pumped car is at mechanics now getitng tuned with the way smaller 8cm housing:) Im thinking im going to have a mid range monster on my hands:)

Different dynos and different tuner, and we will be looking to see how suspect the 3" cat is, so results wont really be comparable. But i have high hopes that this tune will be on the money:)

I was winding 12 degrees extra ignition into the whole map, car had way more off boost response and boosted way harder as well, and not a hint of detonation or a knock level above low 30s (same as before)

So the car appeared to be making the laggy 222rwkws at 16psi with no effort at all,nice and safe. I fugure safe doesnt get you anywhere in this world, sure as sh1t has done nothing for me the last 12 months so "better to burn out...then to fade away":)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...