Jump to content
SAU Community

Recommended Posts

Hey fellas

I saw in a recent post about RB26 Cams in an RB20. I would like to do this, but i have seen that with the stock ECU the idle is pretty messy. If i had a powerfc and got it tuned properly would the car idle better?

Also does anyone have a rough idea of how much increase i would get from this mod?

Finally anyone know the cost of RB26 Cams?

Thanks heaps!

Link to comment
https://www.sau.com.au/forums/topic/66891-rb26-cams-in-rb20-with-power-fc/
Share on other sites

Basicly the workshop doing my tuning has a spare set of 26 cams laying around, so they are gonna fit them up and see what they can do. Should be very interesting. But im prepared to buy tomei cams and adjustable cam gears if needs be later on down the track.

yeah i had a look on nengun.com at cams. then saw someone here put rb26 cams in an RB25 and also an RB20 and they said idle was a little rough so i thought if you had an aftermarket ecu it would make the car idle easier as you could change heaps of stuf etc etc.

It was tried on my car with re-written ecu and Pfc. The results werent that great, ie hopeless.

You can get RB20 cams for around $850, i suggest you get the real deal, or at least get the RB26 cams machined to suit the hydrualics. Thats based on my experience, others seem to have had more luck, but i know of two first hand instances where it was a waste of time, and in my case a waste of money.

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.  

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

i don't know what to say to that other than

- my mechanic would not stock any other parts

- i saw the old cams that came out of the engine before they went into the bin (they acutually snapped one getting it out)

- mechanic is a friend of the family

cams were purchased from GT51R who has (had) a well documented white R33 GTR Vspec so i have no reason to doubt the origins of the cams

yes, i actually have no ws of proving if they were specifically rb26 cams as there was no 'rb26' printed on them etc. but my mechanic said that they had a higher lift of about .5mm

next time you are in brisbane you are more than welcome to come and check them out if that is possible (as long as whatever you take off you replace) and you buy me a slab as compensation :P

Waz.

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.  

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

/bitch

Roy, meaning to doubt you but I would place a bet on the fact that your RB26 cams were not installed correctly, and the workshop handling your car had no f'ing idea and jerked you around. Quite possibly they have parts of yours lying around their workshop.

/bitch off

LOL...yeh the installation was definitely the problem with my car. The journal that i stole off Bl4ck32 had a different tolerance to mine. So after running for a while it started to gal, and the inlet cam borderline seized resulting in the timing belt to skip teeth. So i think i can attribute the damage aspect to the tool with the wrences (me) and the different sized journal. When the cams were removed the damage was most evident on that journal I7.

So my thing idled like a piece of sh1t, but i never drove it out the driveway. The cams were cleaned up and tried in a friends R33, and same deal, woudlnt idle too well. He went for a drive and the car was an absolute dog under 4,500rpm then it took off.

Admittedly the PFC wasnt tuned for it, but this particular R33 makes boost like a truck and has a turbo with similar performance to a 2530. So my experiences combined with his, using the exact same R33 GTR cams means that im a little gun shy now of the whole thing.

And personally, i would get them machined to suit the hydraulic lifters before installing them.

Now run off and find some more wicked sh1t to put on my car..just so i can spend the next 18 months farking around/up ...:P

Brisbane? Since when did you move from cold and dreary Melbourne.  

Based on mine and a friends experiences...well, happy to hear more from ppl that got the whole thing workign properly

moved up in jan to study medicine :)

the weather is so good its not funny...

OK didn't read the whole thread but for $280 incl. I can re-grind your GTR cams to hydraulic spec. This is a Nissan grind and it acutally makes the profile larger because there is no more clearance. Do not get overly excited about the increased size because it isn't a huge amount over the GTR cams but it does make them hydraulic and it WILL work in every instance. The area under the lift-duration plot (at the valve) is an increase of 5% over the GTR profile but this is all in lift. So this means you get the same duration at 0.050" but an extra 0.5mm lift at the valve. The base circle will be approximately 0.5mm smaller in diameter which the hydraulic buckets will take up.

I don't want to start a sh1t fight, just offering a solution.

Sorry I didn't organise this earlier Roy... :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...