Jump to content
SAU Community

Recommended Posts

Yes i know its a bit of cheap question but i actually did a search and no topics came back.

Just wondering what's the concensus on engine oil?

Mobile 1 - has a 5 viscus rating from what i know smaller number means thinner consistency only one from the shelves i've seen with a 5 viscus. about $55

Caltex Magnatec - 10 viscus rating but does all that stuff they talk about reducing engine wear at start up actually work. about $45

RedLine Oil if you can afford it but i can't so i can't put it in the discussion, i got told its like $120 a 5L bottle.

i see so many topics about what petrol to use but nothing for oil.

thanks

Link to comment
https://www.sau.com.au/forums/topic/66930-what-oil-to-use-in-the-skyline/
Share on other sites

Yes i know its a bit of cheap question but i actually did a search and no topics came back.

No offence buts that’s BS... either you are typing in the completely wrong thing or I don’t know what’s going on. Do a proper search for maybe like "service" or even just browse through the maintenance area.

i ain;t shitting you guys i searched for words like oil, change, what oil to use, oil filter in the advanced search and all open forums selected and this is what i got for a reply

Sorry - no matches. Please try some different terms.

and then search again and then

Warning: mysql_query(): Unable to save result set in /includes/db_mysql.php on line 212

There seems to have been a slight problem with the Skylines Australia Discussion Forums database.

Please try again by pressing the refresh button in your browser.

An E-Mail has been dispatched to our Technical Staff, who you can also contact if the problem persists.

We apologise for any inconvenience.

but looking through the general maintenance thread as leech_ suggested

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...