Jump to content
SAU Community

Recommended Posts

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

Not a problem Scotsman, just need whoever else is in VIC to let me know to send it down with yours. How long do you want to give the other Victorians though?

Give em a week to let you know. VIC ppl please let ed know if you wanna do it this way.

Guys, I think I made an error in assuming that a 19mm deep socket was included as they are not included. I realised this last night when someone asked me.

If you wish for a refund, please let me know and I'll get it done today for you.

My apologies about the f*&k up on my part ;)

Ed

$10 here for a 1/2" drive 19mm 8.5cm deep impact socket, just the thing for putting on the end of your torque wrench http://secure.global.net.au/otcgi-bin/otsb...1:10:C:KIDIS19M

Ed,

Would you have a spare nut so that i can try finding a socket for it ? the holes are too small without a socket extension.

...can u pls pm your number to me?

0432 889 887

You can try my set.

Car is still at the panel beaters waiting on a front bar :P

$10 here for a 1/2" drive 19mm 8.5cm deep impact socket, just the thing for putting on the end of your torque wrench http://secure.global.net.au/otcgi-bin/otsb...1:10:C:KIDIS19M

I bought my 9 piece 1/2" drive 19mm deep socket @ Super Cheap Auto for $40.

It's the Super Works Gold which comes with a Lifetime replacement warranty :cooldance

Tried 1 nut one the wheel to see how they look and if I may say so, they look SWEET !!! :wassup:

Thanks for organising / running the group buy ed.

Pos Trader Feedback left. :P

Post up a pic so we can see how they look

I will. Just got some work to do on the car this weekend, then I'll fit all the wheel nuts take some pics. The look strange on normal wheels IMO but with the wheels I've got, they look the $hit !!

These are my wheels with standard nuts.

Here's some pics ( really crappy pics, I know ) showing 2 of the new nuts and the old ones on my wheels. You can see the scratches on the wheels which is why I got the new nuts ( normal nissan w/nuts 21mm & the new nuts 19mm ) no more socket damage to the wheels :P

I'll try to take some better pics soon. If they turn out as bad as those ones I'll give you a yell :P Man I thought for sure these would all be gone by now ! These are great nuts ( especially for the $'s ). Everyone must be spending their hard earned money on carbon fibre cup holders :rofl:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...