Jump to content
SAU Community

Recommended Posts

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

hey, this seems like a good buy. before i consider purchasing one, i want to know if the gearknobs have the H pad pattern on the top ? i havent got my skyline yet, but will be doing so at the end of the yr. this is gonna be my first manual car, soo i kinda need the H pattern to learn my manual properly(never drivin one before).  

the pics ppl have posted doesnt seem to have it. but can u confirm this ?

thnx

also, where about in melbourne are u located ? please pm me. thnx

hey r43_skyline,

they don't have the H pattern on them.

for everyone else, I bought one of the matte ones from Greg yesterday.

They have a nice weight to them, very good quality!

too bad they dont come with the inserts, but for the money you save buy a really cheap knob say for $20 and get the inserts from that. Your still $90 ahaead of buying the real thing! :headspin:

OK i ve been playing around in paint and this is pretty close to what i made. It worked for me i might not work for you. The first hole is either 14.5/15mm cant remember exactly shouldnt matter that much. Ok on the original insert the second hole is 10mm (too loose) so i made it 9mm. Made it 9mm because the gear lever is 10mm diameter it has a thread pitch of 1.25mm and i m pretty sure ISO metric fine thread. As a rule of thumb you make the hole 1mm smaller than the thread hence 9mm. If your worried about it being too lose try 8.5mm or something.  

Remember i used plastic not metal. So you can make the hole slightly smaller. You might have to modify the standard screw to get it to fit in the hole i got another with identical thread and ground it down on the grinder to make it fit. If it all works well should be albe to screw the screw in the top of the insert that goes in the actual gear knob, then screw it by hand on to gear lever. Mine fits fine no play. Let us know how you go.  

PS I was gonna post up a pic i made up in paint but im a noob and cant work these forums. I can email it to ya if ya want.

yep cool.. will try the rubber insert method first then do your method..

tho i still don't have a lathe..

  • 2 weeks later...

Hi guys according to Australia post the gear knobs will be instock tomorrow. As soon as I have confirmed this I will send out PM's with payment details.

I CAN NOW ACCEPT PAYPAL!!! (credit card payments)

Cheers

Greg

Hi guys according to Australia post the gear knobs will be instock tomorrow. As soon as I have confirmed this I will send out PM's with payment details.

I CAN NOW ACCEPT PAYPAL!!! (credit card payments)

Cheers

Greg

its just after 7PM and the courier has just dropped off the gear knobs!!

Thats right.

GEARKNOBS ARE NOW IN STOCK!!!!

Payment information.

Prices are $75 delivered for chrome and grey gearknobs. The price for black chrome is $85 delivered.

There are 2 payment options. PayPal or Direct deposit.

My PayPal payment address is: [email protected]

OR

My bank deposit information is:

Acc name: Greg Kruse

BSB no: 063622

Acc no: 10142769

I bank with the Commonwealth Bank.

NOTE: if making payment in a bank it is CRUCIAL that you PM me the BSB number of the branch where it was made. if this is not done you will not get your item as I dont know who the payment is from. If you are making the payment via netbank then you MUST have your user ID as the reference.

Once payment is made please PM me with your full name, address (including post code and state), and your order stating which color you would like.

All items are sent out by express post so they will get to you 1-2 days after payment is made.

Cheers

Greg

money deposited

Hi mate, have you received your item yet? It was sent out next business day after payment was made by express post.

Cheers

Greg

Received gear knob on Wednesday 25.5.05.

Thanks Greg.

Hi mate, glad to hear it arrived nice and quickly. :cheers:

I still have some chromes left in stock!! Who wants them?

Greg

  • 2 weeks later...
Hi mate, glad to hear it arrived nice and quickly. :)

I still have some chromes left in stock!! Who wants them?

Greg

Do you have any gear knobs left at all and jow much are they?

  • 4 weeks later...

More black chromes and matt gearknobs will be here in around 10 or so days.

Please send an email to [email protected] to be on the list.

Cheers,

Greg Kruse - GK Technologies

www.gktech.com.au




  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...