Jump to content
SAU Community

Recommended Posts

well... after blowing the cobwebs out of the 32 last nite... the clutchfan decided to begin seizing on and off... overrevving the fan obviously...

nipped on down to FBI to grab a new clutchfan as this one was about to let go at anytime... - got the new fan, threw it in the backseat and off we go

pullout onto the main road... 1st gear... into 2nd... *BANG*

Random329.jpg

BIG HUGE THANKS TO TREV AND THE FBI CREW TODAY! Wouldnt have made it away from the workshop without you guys!

- adz

oh and heres the pics from the self-venting-input-incident :P

Random337.jpg

Random339.jpg

Random341.jpg

Random343.jpg

bonnet was just f**ked... so new one now (black)

radiator had 3 cores removed so that was f**ked... got a new one

powersteering pump belt was cut... got a new one of them

powersteering pump line slow leak... still got that - will fix it on the w/e

Random345.jpg

ill take pics tomoz of the clutchfan... well half of whats left of it!

after putting new rad in and flushing the system... water temp has dropped majorly and the car runs alot smoother :)

also big thanks to mike (TUF200) for letting us use his tools on such short notice and to nicko for helping me out with everything :)

- adz

Rezz the car only just landed on wednesday... so obviously it isnt registered yet - i had a permit though!

my friends rb25 blew up in his r32 4 door... so tomorrow im getting another permit n going up to his house... sitting both cars side by side... and putting all his stock shit on my car... then tuesday put her on the dyno for a quick power run just to see how bad the tune is and what shes making... then i drop the car off at FBI for compliance and prolly wont see her for several weeks

- adz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...