Jump to content
SAU Community

Recommended Posts

HI all I after an exhaust for a Cefiro I have spoken to some one a few weeks ago about one and been trying to get intouch with them ever since.

Also another purchase fell though and really wondering how the hell to get an exhaust for my car

I am after mandrel bent preferable, 3" cat back and stainless steel would be a bonus

ta

Andrew

0438890852

__________________

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/
Share on other sites

Gday mate,

There was someone who posted up a cefiro exhaust for about $500, it had no cat but you could put one in. I can't remember who posted but hopefully they'll see this post and answer... it was from WA or SA I think.

Otherwise you could get a custom made at a zorst shop.. I don't see how it'd be more than a 300-500 ?

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1260851
Share on other sites

driftaR32  

Location: Perth

i got brand new cefiro catbacks

450 free delivery in perth metro

or 450 + 80 postage anywhere else

http://www.4u.com.au/~dylan/products/a31cb.JPG

comes with gaskets, silencer to shut yuou car up for compliance etc etc

[email protected]  

That the one? :P

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1260878
Share on other sites

Otherwise you could get a custom made at a zorst shop.. I don't see how it'd be more than a 300-500 ?

sheeit. i'd do it if i could find a cat + catback pipe and decent muffler for under $500 (did you mean fitted or not)?

I just got a 3" pipe put in to replace a farked pipe from engine to cat for about $300 but that included drilling out threaded bolts and a few other little issues. catback system is next on cards.

group buy for stock NSW ceffies!!

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1262114
Share on other sites

that cat back pipe shown up on this page is actually a really great product! my freind has recently put one on his r32 gtst. it sounds awesome! and almost sits as high as the factory pipe work (only larger diamiter). for 450 it really is a bargain. and Dylan is a top bloke you wont be getting ripped of when purchasing his products

cheers

Adam

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1262951
Share on other sites

that cat back pipe shown up on this page is actually a really great product! my freind has recently put one on his r32 gtst. it sounds awesome! and almost sits as high as the factory pipe work (only larger diamiter). for 450 it really is a bargain. and Dylan is a top bloke you wont be getting ripped of when purchasing his products

cheers

Adam

post up some pics for the non believers. i've seen those exhausts around, and every car i have seen them on it hung low as a hookers morals. they just dont seem to form fit to the cars underbody.

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1263433
Share on other sites

the exhaust is stock height from the chassis, there's no such thing as multi fit exhaust every car has a different chassis number and different lengths and different mounting ppoints,

here's some pics of the exhaust and it on my car. note that the car is good and kicks ass....

adrln was it you that got rear ended by a kingswood? if so you can buy some series 1 tail lights off me if you still need em,

still trying to get in contact with dylan though but will prevail! cheers!

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1264205
Share on other sites

nice pics LOL.

you most be steve the pirates cousin. AARGH!

can you shoot a shot under the car of it lengthways ie from side on so i can see how it hangs along the underside - the angles you have make it hard to judge the height of it along its length...

cheers

how long did it take to fit?

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1264274
Share on other sites

Yea mate it was me but I have source other lights ...............but can you send me pics and a price mate I'm still might be interested

Well I have bit the bullet and the car goes in tomorrow for a 3" mandel bent exhaust not to sure if it's stainless or not will find out in the morn. I have been qouted about $450 with out muffler

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1264782
Share on other sites

Well the exhaust went on and I though it would be a different ride .......but no I was wrong something else was stopping it, after hours of medling and one hour before drift meet we sourced problem it was a blocked fuel filter

Now I have smoke while drifting I'll see if I can get some vids posted up

Link to comment
https://www.sau.com.au/forums/topic/68033-cefiro-exhuast/#findComment-1270893
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...