Jump to content
SAU Community

Recommended Posts

This Group buy is for a hybrid copy intercooler size being 450 x 300 x 76mm. Need 5 people to register for the cooler to cost $280 + delivery($20). Cooler are here right now so once we get 5 people I can ship them off or you can pick it up.

HERE ARE THE SPECS.

Attrictive polished aluminum look

3" inlet and 3" outlet pipes for high flow

Low pressure drop 0.2psi at 15psi of boost

80 psi for up to 800 horses

Made by lightweight but strong material. Same Structure and material used as famous "Hibrid" Intercooler. Weight ~8kg

All coolers have been Pressure tested.

15 bars core design. For more efficient air flow over the older 16 bar design.

PACKAGING

As seen in the picture the cardboard box has polystyrene strips to protect the fins from transport damage. The cardboard box is even double up in places for extra strength.

PAYMENT

Payment must be by Direct Deposit.

Local Pickup is available. Save postage

Registered Interests

1) Predator

2)

3)

4)

5)

FAQ

$5 per cooler will be donated to SAU

Link to comment
https://www.sau.com.au/forums/topic/68130-intercooler-450mm-x-300mm-x-76mm/
Share on other sites

I'm definitely in, as I just sold my larger one..

These are a great fit for R32 guys, without having to go as crazy cutting the bumper to hell and back like with the wider one.

flex: This item is for the intercooler only...you can get piping kit from car performace stores. I will be able to do piping kit in the near future sometime - not quite sure when though.

GTR 94: I will be lying if I try an answer this question. :rofl: Anyone know?

MJKAPC.. I've measured it, and the 450x300x75 cooler is that much better for fitting under an R32 gts-t with stock front bar.. compared to the extra 20cm of the larger one that many people have (and cut to crap front bars)

You will still have to cut the bottom of the bar a little.. but you shouldn't have to cut the main bumper support due to the width, which you would for the larger one.

So I believe anyhow, that is should be a much better fit, and that's why I'm getting one ;) so buy one, and I can save $20 :cheers:

OK guys I have recieved your money. I tried to get the coolers on the weekend but he had no stock on him. He stores them in a warehouse somewhere. I was told I can pick them up today if I can get intouch I will drop down to pick them up tonight.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...