Jump to content
SAU Community

Recommended Posts

If there was anything at all to remind me that my car is really just a Japanese Commodore, it's the bloody squeaks in the dash!

I don't expect anyone to be able to find them for me, but what I was hoping was that if there was anyone that identified a squeak in their dash, could they post in here what it was and how they fixed it if they know how (or just ask for advice like I am).

I've got 2 squeaks in my dash, both sounding like they're in the centre somewhere. I think I've identified one, but I don't know how to fix it. This one seems to be a flap in one of the air conditioning ducts in the middle which temps to thump/clunk up and down when I go over bumps or get a standing wave in it over multiple bumps. I've found a bit that's movable on the right hand side when I stick my hand through the centre console with the radio removed, and I can make the same noise manually. But it doesn't seem loose, and it springs back ok, so I'm not sure what I can do to fix this. Perhaps gluing some clark rubber along it or something.

The other one seems to be higher than that, but looking at pics of a disassembled dash there doesn't seem to be anything up there capable of making this noise. It's kind of a metal-on-metal creak type noise, or perhaps plastic on metal. It tends to happen only on small bumps or generally uneven road. I thought it might be my suspension from either the radius rod bushes or the swaybar, but this seriously seems to be coming from the middle of the car and there are no bushes there. I deduced this by asking my passenger - it's coming from her right, but my left. This has to be in the middle, surely?! It also sounds like it's in the high cabin rather than under the car and outside. But squeaks are the master of ventrilloquism so I'm not ruling out anything.

Any help is greatly appreciated!

Link to comment
https://www.sau.com.au/forums/topic/68171-squeak-in-dash-where-is-it/
Share on other sites

u know wat ... i have the same issue :) this bloody SQUEAK is sh#$ing me to DEATH! i think its passenger side near air duct too or down the windscreen air duct i cant tell and my missus has no idea either :)

I would like to get some feedbak here to :(

Yep, i had this ever since i owned my car. Its a knocking sound that happens on bumpy roads somwhere in the passenger side of the dash. Short of ripping the whole dash assembly out, i've tried everything to fix it! Seeing as there is 4 days in this weekend, i reakon ill pull the dash out. The roads are shit where i live, so combined with 'solid as' tanabe coil-overs the noise drives me crazy!

u know wat ... i have the same issue :) this bloody SQUEAK is sh#$ing me to DEATH! i think its passenger side near air duct too or down the windscreen air duct i cant tell and my missus has no idea  either :D

I would like to get some feedbak here to :)

Yeah i have that, but not so much a squak but quiet rattle, I have a bit of crap floating around so it might not be anything but i've had a quick whip around with no luck! :(

Ok, ive pulled the dashboard out. I went for a short drive, but im limited to where i go (due to no indicators) I've found the area where my rattle is coming from. Any ideas or suggestions would be greatly appriciated!

Cheers,

Sam

The rattle is actually behind that heater box that the arrow is pointing at. Does anyone know of there is much of an area behind that box? I really don't want to pull it all the way out if i can help it (removing that intrusion bar and everything underneath it doesn't look like an easy job).

Cheers,

Sam

Yeah hey, pulling the dash out was a pain! But i still haven't located the rattle! I also pulled the LH guard out and everything inside that and removed the side skirt. the rattle wins this one cos i dont want to strip the car down to a bare shell looking for it. It wasn't a complete waste of time though, i tidied up a lot of dodgy and exposed wiring around the instrument cluster and stereo, and replaced all of the dash and vent seals with new weather strips.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...