Jump to content
SAU Community

Recommended Posts

Glad to hear it Mark.

The low down grunt of the ute definately takes a lot of turbo drivers by surprise. Felt as quick as my old S15 when you took me for a spin.

BTW my "R" is now in the docks going through the customs crap.

Hope to have it ready by Xmas.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

One of the only runs I've had with a Commadore was with a GTS 300kw one.

Rolling start from the bottom of 2nd gear, it was a close run - very close, but at the top of third I was pulling away JUST.

I must say that they sound GREAT, I'm not sure if it had a standard exhaust, but damn it sounded good.

At that stage I just had full exhaust, 12psi and pod with CAI.

I have no idea what 1/4 times I'd do - I'd say about a 15-16 sec pass due to my crappy reaction time !!! :bahaha: :bahaha:

And I have no idea what sort of rwkw I have, once I get a new ECU I'll do a dyno run :)

J

why? because everytime i go on a cruise with a bunch of commodore killers me and mates never see any of it happening. So either i cruise with the wrong crowd or maybe they just race slower commodores than mine.

Most cases i hear of commodores being beaten its because they're a dressed up 6cyl auto banger.. :D

eitherway its a good kill, and i am still curious as to his 1/4mile times.

for those are gonna go wrx hunting, waite 2 months so i can then bring it out any time rather than work around person we've lent ours too :D

Originally posted by summoner

why? because everytime i go on a cruise with a bunch of commodore killers me and mates never see any of it happening. So either i cruise with the wrong crowd or maybe they just race slower commodores than mine.

Most cases i hear of commodores being beaten its because they're a dressed up 6cyl auto banger.. :D

eitherway its a good kill, and i am still curious as to his 1/4mile times.

for those are gonna go wrx hunting, waite 2 months so i can then bring it out any time rather than work around person we've lent ours too :D

Hicks ran mid 14s when I was at the wed night drags. He might have run a low 14? It wasn't a nice track prep and the commo's & HSV 300kw/255's most were in the mid/high 14's for that night. Couple of good ones (worked) got low 14's and there was one or two in high 13's. There was quite a good turn out of holdens and it gave a pretty fair comparison of performance (ie: everyone had to contend with the same crap track).

I don't think you can muck around with the 5.7s if you expect to beat them on the street. I've won against most of the different models, not lost yet. However there are some very fast ones on the street that will show a clean pair of heals to my dunger.

my dad just bought a VY SS last week or so.. gave him a run down tonkin hwy sunday and he got me by a car length or so at 160 odd km/h

i had it pinned to redline through all the gears whereas he only took it to 4k5 each time.

Summoner: they got much more grunt after that?

gunna have to ask him for a turbo or intercooler for xmas i think.

:D :D

Shaun

Originally posted by rev210

Hicks ran mid 14s when I was at the wed night drags. He might have run a low 14? It wasn't a nice track.

Whats goin on with the track lately, My best time was 14.2.

I plan to get highish 13's this wednesday. Gonna chuck my stock rims on the back so I can do a bit of a burn out before hand.

One of the blokes I work with is gettin me some slicks. Shit yeah!

Originally posted by Hicks

Whats goin on with the track lately, My best time was 14.2.

I plan to get highish 13's this wednesday. Gonna chuck my stock rims on the back so I can do a bit of a burn out before hand.

One of the blokes I work with is gettin me some slicks. Shit yeah!

That wed they skimped on the VHT for sure. The factory time for the gtst r33 is 14.2, I'd say a factory claim like that translates to a high 14 or low 15 on a night like that at the plex.I pulled a better time than most of the Commo's there and that makes sense because I beat them on the street too.

Whilst on the subject - my mate just picked up his brand spanka VY Clubbie - HSV have done a good job in improving the suspension and handling...

I had a few runs with him yesterday and I had him to about 160 then he slowly started to creep on me (I only have exhaust & pod)

Ciao

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...