Jump to content
SAU Community

[NSW] Boost Bitz Dyno Day, Sat 9th April

buz138

By buz138,
in Events Archive

 Share

Recommended Posts

buz138 Enthusiast

buz138

Posted
Posted

Hay Guy's, I'm holding a Dyno day/Shootout on the 9th of April at Berowra (10 mins from Hornsby) Bookings are a must, details are as follows:

Special Geust 'BAG11N' Hilux as featured in Fast Fours

Where: Dumar Auto Technics, Berowra Waters Rd, Berowra

When: Starts at 9am, 9th April 2005

Cost: $60 per car with certified Dyno printout and trophies

For additional info and bookings please call Chad on 0422 140 919 or 0433 405 788

Should be a good day for all......

buz138 Enthusiast

buz138

Posted
  • Author
Posted

GTR Boy's, you all should know that R32's can be converted to 2wd on the spot and then changed back with a simple fuse as Duncan said..... So get ready to show us some BIGG KW figures........ and possably R33.......

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...