Jump to content
SAU Community

Cefiro power

jason2040
 Share

Recommended Posts

jason2040 Apprentice

jason2040

Posted
  • Author
Posted
195rwhp.  Stock engine exaust etc.  Fuel reg, GTR (or similar) pump, stock dump then 3inch back, and about 12psi, stock cooler also.  :)  lightweight flywheel too, which would help rwhp figures.

cool man. i got 260rwhp with rb20 bottom/ rb25 top running 8psi. lot of internal work done

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1282751
Share on other sites
jason2040 Apprentice

jason2040

Posted
  • Author
Posted
260...respectable...how's the torque...does it have any lag at all? im just curious

not too much lag actually. boost comes on pretty quickly. i'm lookin for a power fc for it cause i only have the stock computer re-maped and my boost controller isn't working properly. looking to boost it 20+ psi. cause 8 jst aint enough

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1284250
Share on other sites
BasketCase Collaborator

BasketCase

Posted
Posted

271rwhp RB25, Hiflowed turbo with GT28 cartridge, 9psi, wolf3d, SX fuel reg, pod, custom turb manifold, 3" full zorst, 680x300x78 FMIC, oil cooler...

Need bigger injectors for more boost, so much of my turbos potential is wasted here, anyone got any suggestions on a good injector upgrade?

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1290625
Share on other sites
dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
271rwhp RB25, Hiflowed turbo with GT28 cartridge, 9psi, wolf3d, SX fuel reg, pod, custom turb manifold, 3" full zorst, 680x300x78 FMIC, oil cooler...

Need bigger injectors for more boost, so much of my turbos potential is wasted here, anyone got any suggestions on a good injector upgrade?

Also how do you find the wolf? Or more so the tuner?

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1290702
Share on other sites
BasketCase Collaborator

BasketCase

Posted
Posted
Also how do you find the wolf?  Or more so the tuner?

I got the wolf of a user on this forum in the for sale section, it was in QLD, now it resides in NSW

It only got tuned 3 days ago, I found the tuner on the wolf website as one of the distributers - I was in a bit of a panic at first looking for tuners...

The car runs beautifully with the wolf in and tuned, with the exeption that it won't idle on a cold start but im sure thats just a tweak that needs adjusting and usually within 1 minute of driving its happy to idle at the first set of lights I hit.

I'll get that fixed up in the near future anyways.

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1290873
Share on other sites
Ceffy_SA Collaborator

Ceffy_SA

Posted
Posted

Hi, my cefiro was just put on the dyno, its only putting out 124kw ATW, it has a RB20DET and a factory 5 speed, the only work that has been done to it is a Pod filter, 3inch exaust, GTR fuel pump and 0.7bar of boost (i think is stock)

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1308730
Share on other sites
funkymonkey Grand Master

funkymonkey

Posted
Posted

mine makes 128 rwkw with a cat back exhaust and a GFB bleed valve on an RB20DET... hopefully soon I'll be able to fit a jaycar fuel adjuster, pulse controller and boost controller and get some better response... someday when I get time.

Till then I'm happy with the power the relatively stock car makes.

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1317909
Share on other sites
kursed Rising Star

kursed

Posted
Posted
Just had mine @ XTC and it made 130rwkw with a stuffed exhaust baffle.

Got that fixed so apparently it is around the 150 mark with pod, 3 inch cat back, GFB bleed valve at 10psi.

Getting GTR cooler and 2530 soon.

really? that sounds like a lot of power for those mods? 150kw... I could understand a 130 with exhaust and a bit of boost but 150 seems a big jump in power after fixing a catback issue. you have the rb20det right?

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1318336
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...