Jump to content
SAU Community

Recommended Posts

Hay guys,

Just wanted to ask what you would recommend (preferably through fisrt hand experience) what the best method is for increasing KW@rears to about 220 - 250.

At the moment i would estimate i have 180.

I have a 92 gts-t with:

2 3/4" from cat back

hybrid i/c

bov

greddy elec boost controller (set to 11psi low - 14psi hi)

550 kw bosch fuel pump

other than that she's basically stock

I was advised that for around $2300 supply &fit I would get 220 for:

- injectors

- adustable cam gears

- GT25 turbo

So for roughly the same ball park figure what would you suggest I do?

Much appreciated..

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/
Share on other sites

hmm i would of thought with ur current mods on an RB20 i assume, u'd have 150-160max rwk. I highly doubt u could get to 220 with those extra mods. For one u'll need a computer, clutch....and i reckon 22o is pushing the gt25 turbo.

Interesting to hear other people's comments

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1290819
Share on other sites

hmm i would of thought with ur current mods on an RB20 i assume, u'd have 150-160max  rwk. I highly doubt u could get to 220 with those extra mods. For one u'll need a computer, clutch....and i reckon 22o is pushing the gt25 turbo.

Interesting to hear other people's comments

Cheers for the reply, but you haven't helped my quest

what power your 33 got?

by the way that estimate was from a mate with a 94 vspec2 gtr

my car was on 16psi when i took delivery

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1290871
Share on other sites

So easy to quote KW figures yet there so unreliable when you think about it.

I reckon you got maybe 155 to 160 max from personal experience.(depending on dyno)

ontop of what you been quoted bank on atleast on another 2k for things like Engine management fuel reg and cams. (cam gears aint much good without Cams to dial in on an RB20)

220 to 250 is asking alot from an rb20 dont get me wrong the rb20 is stron but getting that reliably might be alot more work. read expensive than you think.

my 2c

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1290901
Share on other sites

Hay guys,

Just wanted to ask what you would recommend (preferably through fisrt hand experience) what the best method is for increasing KW@rears to about 220 - 250.

At the moment i would estimate i have 180.

I have a 92 gts-t with:

2 3/4" from cat back

hybrid i/c

bov

greddy elec boost controller (set to 11psi low - 14psi hi)

550 kw bosch fuel pump

other than that she's basically stock

I was advised that for around $2300 supply &fit I would get 220 for:

- injectors

- adustable cam gears

- GT25 turbo

So for roughly the same ball park figure what would you suggest I do?

Much appreciated..

I have a TRUST TDo5/TDo6 turbo for sale as a bolt on kit for $1300. It comes with turbo, modifyed standard manifold, Trubosmart 45mm wastegate all oil lines intake pipe to connect to afm dump pipe and front pipe aswell as screamer pipe. I am doing a 2jzgte into my R32 gtst so i no longer need this. With a chip or ems you will easily get the power you are wanting. I got 318hp atw (238kw atw) on 15psi with only a 3inch exhaust and a small shot of gas (stock computer, injectors, intercooler and what ever else comes stock on a R32). This was through

an automatic as well. If you are interested i can send you photos. BTW price is not negotiable as this is already a good deal.

Chris Illing

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1291175
Share on other sites

Cheers for the reply, but you haven't helped my quest

what power your 33 got?

by the way that estimate was from a mate with a 94 vspec2 gtr

my car was on 16psi when i took delivery

that guy was probly estimating abut too much...

all GTR owners are like that :kick:

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1291208
Share on other sites

realisticly i think with your current setup you would be looking at about 170 rwkw's but you havent mentioned what you are using to control your 550 cc injectors coz if you have nothing then i would have to say you current setup will be about 150-160rwkw and your car will be running hell rich for nothing.

220 is too much to ask from the mods that you have listed but 200 is quite achievable and would be quite reliable. hope this helps :)

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1293689
Share on other sites

As th others have said, You really need to look into firstly, tunable computer PowerFCs a good start, then injectors, then turbo prolly aim for larger than a Gt25... maybe a Gt30. Just do your research it helps indefinatly.

I have an Rb25 with a hi flowed custom made type of Gt25 and im only just pushin 221rwkw

car has great response (being a drift car thats what I aimed for) but on the 2l smaller block that you have you'll need a good turbo manifold to spool a bigger turb and more fuel to the mix to turn out that kinda power.

Link to comment
https://www.sau.com.au/forums/topic/69806-recipe-for-power/#findComment-1298139
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...