Jump to content
SAU Community

Recommended Posts

Howdy all.

I ran my Stagea at the local drags last weekend for a bit of fun. The best time I could do was a 16.72 at 130 clicks I think. My slowest was a 16.88 so I was pretty consistent. My reaction times were .5s and .6s.

My question is.

What should I do to my wagon to really get her hopping without losing and preferrably gaining some reliability?

I already have a full 3" exhaust, rampod and an SAFCII my Profec B Spec II should be here next week. I should also have a front mount and a bigger transmission cooler by the next meet, also a carbon box for my rampod.

Is there anything else I should consider?

Id love to get the valve body upgrade installed. If I bought one could I install it myself?

Oh and would it be safe to have my car running 11psi for the whole run? Should I start at a lower setting and then switch it up?

I think thats all I wanted to know.

Any help would be fantastic.

Thanks guys.

Zane.

Link to comment
https://www.sau.com.au/forums/topic/69809-dragin-the-wagon/
Share on other sites

My 10 cents (race meeting this weekend, have to move it)

I have been using 10 psi for quite a while now, I can get 7 psi at max stall on the standard torque converter (around 2,300 rpm) holding it against the hand brake and the foot brake. I don't worry about reaction times, it has no effect on your ET.

Note that I have zero mechanical mods, just the IEBC and the DFA. The exhaust and intercooler upgrades will make a big difference.

How were you launching yours?

Link to comment
https://www.sau.com.au/forums/topic/69809-dragin-the-wagon/#findComment-1291134
Share on other sites

Went to Adelaide International Raceway last night and did two passes. I managed a 15.2 and then a 15.0 at 91.3 mph. On my second run I went up against a Subaru Legacy GT with similar mods to mine, (full 3" exhaust, R34 GTR intercooler, 10psi, exh. cam gear, air filter, s-afc II). He ran a 15.5 but still won due to a much better reaction time.

It was all a bit of a learning experience for me, so I'm hoping that with some practice, a little weight reduction and a slightly better tune, a high 14 will be achievable.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/69809-dragin-the-wagon/#findComment-1303946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
×
×
  • Create New...