Jump to content
SAU Community

Recommended Posts

hey all..

im looking for some rims with tyres.

something to suite an R32 GTR.

i dont want to spend too much so stock r33 or 32 gtst wheels are fine.. as long as the tyres have a decent amount of tred

I have 4 GTR stock rims, two are mint, two are a little marks, with 225/50/16

travel about 6000 km.. tires still have 85-90%.....$800

still have 4 brand new falken azenis semi slick tires, never use and fit, sticker still on it.. $900

If u happy take them ....$1600 ono

any other wheels out there?

i will pay up to around $1400 with tyres depending on the wheels

hmm.. well i cant buy slicks as i need them for complience.

i still have 3 more weeks before i need to buy them.. so i would prefer something a little cheaper

I have a set of standard R33 Skyline wheels with as new 215/55/16 Dunlop Formulas on them. The rims have some scratches on the centres but the tyres are like new. You can have them for $695 delivered.

I have a set of standard R33 Skyline wheels with as new 215/55/16 Dunlop Formulas on them. The rims have some scratches on the centres but the tyres are like new. You can have them for $695 delivered.

hmm.. i think thats a tad much for standard wheels sorry

hey mate,

you may want to consider my wheels for a little more $$$, check out this link:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=70867

marko, 0404 884 876

hey mate,

you may want to consider my wheels for a little more $$$, check out this link:

 

http://www.skylinesaustralia.com/forums/sh...ead.php?t=70867

 

marko, 0404 884 876

hey, yeah i saw them... little too much for me at the moment...

i would prefer to buy from brisbane too

thanks anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...