Jump to content
SAU Community

EOI: Boost to 10PSI for R33 $10

benl1981
 Share

Recommended Posts

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Ok I have copper ones now. I am currently testing on other skylines.

I think it is safer if using the stock intercooler to run 9-9.5psi which is what the latest ones have been made to.

Please note these are mostly for stock cars. Please check you have the solenoid shown below otherwise this piece will not work.

If you want more boost you can easily drill out the provided piece (You will only need to take a 0.2mm bigger drill bit to make about 1-2psi increase). But it is better to run 9-9.5psi.

Ok You will get instructions I put together with illustrations on how to fit this piece and how to fit a boost gauge. And you wiill get the copper piece for $15 delivered.

Sorry about the price increase but I have broken a lot of small drill bits etc

I do have a few different size drill bits so you can let me know what boost you want to run but it will vary up to 1psi between cars so I want to really be a bit cautious and let you drill it out if you want more boost. The drill bits are only about $2 and you shouldn't break it as you will only be widening the hole a small amount

standardsolenoidsmall6wr.jpg

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

ApacheX Proficient

ApacheX

Posted
Posted
Ok I have copper ones now.  I am currently testing on other skylines.  

I think it is safer if using the stock intercooler to run 9-9.5psi which is what the latest ones have been made to.  

Please note these are mostly for stock cars.  Please check you have the solenoid shown below otherwise this piece will not work.

If you want more boost you can easily drill out the provided piece (You will only need to take a 0.2mm bigger drill bit to make about 1-2psi increase).   But it is better to run 9-9.5psi.

Ok You will get instructions I put together with illustrations on how to fit this piece and how to fit a boost gauge.  And you wiill get the copper piece for $15 delivered.

Sorry about the price increase but I have broken a lot of small drill bits etc

I do have a few different size drill bits so you can let me know what boost you want to run but it will vary up to 1psi between cars so I want to really be a bit cautious and let you drill it out if you want more boost.  The drill bits are only about $2 and you shouldn't break it as you will only be widening the hole a small amount

standardsolenoidsmall6wr.jpg

like this? (on right hand side)

image026.jpg

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Yeah I do. I'll be making some more over the next few days.

Most people are happy with 9-9.5psi. Not much gain on stock cooler over this.

I can kind of tailor it to what you want slightly, but there will be a bit of variation between skylines (up to 0.5psi). All the R33s tested on have had a stock intercooler, but I guess front mount shouldn't change things too much, maybe will run slightly higher boost.

I don't recommend over 9-9.5psi on the stock exhaust either.

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Pm replied. Sorry, I will get to everyone over the next few days. I've been busy at work etc. I will make up some more over the next few days.

Due to the amount of drill bits I've broken etc and the time involved the cost will be $20 including instructions on how to fit it (and how to fit aftermarket boost gauge), the piece, and clamps.

I think it is still reasonable value as it shouldn't need adjusting (you can widen the hole easily with a drill if you want slightly more boost), looks stock, and allows you to return to stock in a minute. You also don't even need to disconnect any hoses except off the solenoid. You also don't wreck your solenoid by putting a constant earth to it (which I had before), down the track I may use it for an electronic boost control so I don't want to fry it.

TommO Grand Master

TommO

Posted
Posted

I'd like to recommend benl1981 for being a great seller. Organised delivery of the product very fast, printed out the instructions for me in colour, and went the extra mile compared to what most sellers do.

Great, cheap product, with a decent performance gain.

Thanks again,

Tommo.

TommO Grand Master

TommO

Posted
Posted
ey, on the Ebay.com link you say the stock R33 run 4PSI under 4500RPM, is that right? i tought they run 7PSI, or is 7psi @7000rpm? correct me if im wrong.

: Refer to this SAU tech thread

I'm sure you can feel the power increase at 4500rpm.

Cheers,

Tommo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...