Jump to content
SAU Community

Recommended Posts

Thats right , my R33 4 auto 4 door now totes an RB26dett :flamed:

Its been a long 12 months since the demise of the 1st 25 , with only a brief (4000 kms ) stint with a forgied 25 ( this is a long , costly & painfull story that I will leave to my Lawyers!) all of which lead me to , with a little help from that zoom article , putting an Rb26 into the 4 door.

Basicly , I was able to fit the 26 into the 25's hole by using the 25 engine mounts & just turning the drivers side 1 around 180 degrees.Then shorten the throttle cable , add a GTR radiator top hose & ta da!

I have retained to 25s engine loom so I can keep the Wolf ecu that alows me to run the auto , we just had to change the injector plugs to Bosch ones & change the function of the 25s VVT switch to now be the air temp sensor :)

Although , with the help of Wolf tech support , I am able to use the 26 Cam Angle sensor & change the way the map reads to Ref & Sync. (instead of the modified 25 cas , used for dual point sensing) which has made Cold starts much more reliable.

The 26 is out of an R33 GTR with 51 000ks on it , stock internals & injectors , & the only mods are GReddy adjustable cam gears.

The GTR turbs were rebuilt using T28 (SR20) zorst wheels & housings because they are Steel , & much bigger!

The auto remains stock ( bigger trans cooler coming) but using Redline Racing ATF

which has practically removed any "slip" on the now quite abrubt Gear changes :aroused:

The end result..........376.9rwhp with boost spikes to 20psi before settling to 18psi

& I am bloody happy with that!

The real test will be Drag combat on the 23rd of April so...fingers crossed no :Bang:

Thanks heaps To George & Sean from Adrenaline ( experience counts)

Bart for crazyimports.com

& Steve from Maytech

& here's the pics GTS26tt

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/
Share on other sites

Well done Rep and good to see you using the local boys down there.

I know that Peter Blight has nothing but good things to say about George and his patience with getting it right.

Ohh and Maytech, who who get a lot more business if he realised most peoples working days are 8 till 5 , not 5 till 2 in the morning . lol :)

Dare I ask who the lawyer involves or is it probably someone I already know? :)

Cheers

ken

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1301410
Share on other sites

nice man. Do u mind if i ask wat sort of figures this conversion cost?? I've been thinking about what i'd do if my engine cooked and just wanna know if its a viable option.

Congrats on the figures dude, bet you're stoked!!

I'm trying hard NOT to think about it dude ....

But I think 10k would cover it for a straight engine change ( including the engine that is)

It starts to add up when you go for Modded turbs , Split gate dumps Custom Intakes etc...trust me

Cheers

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1301516
Share on other sites

Yeah nice work troy and good to see it all up and running nicely. It was a nice job Sean and george did on the blue rocket.

So the million dollar question what your guess on ET and MPH for DC.

Plus it will be good to have a couple of the buno boys at DC.

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1302621
Share on other sites

Thanx Pete ,

As for ET & MPH , I'd settle for 12.5 @ 115..... as long as its better than my last run :) (except this is in street trim = No Nos)

I'm not sure quite how bad I want to beat up on it , but lets face it , by the end of the day I'll probably be Stalling it up against the handbrake!!!

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1302651
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...