Jump to content
SAU Community

Recommended Posts

Hi everyone,

I'm waiting to pickup my R33 GTS-T from the previous owner and there was one question he couldn't answer about it.

The unit has an inbuilt LCD screen which controlls the sat nav, cd stacker, am/fm radio, audio equaliser and TV Tuner and, yes, get this, tape deck!!

I didnt check for the brand when I test drove the car, but later on when I spoke to him he said it was a Nissan branded unit.

Has anyone else seen one of these? I'd like to get as much information about it as possible, a manual would be even better!!

Any help appreciated.

Thanks,

Mike

Link to comment
https://www.sau.com.au/forums/topic/70879-sat-navtv-tunercd-stacker/
Share on other sites

yep they are lots of funs to remove and the stacker is a sony A30 unit. they are indeed factory fit on these cars and removing one involves a LOT of rewiring as EVERYTHING is tied to a module behind the rear seat. can't remeber the make of the actual unit but clarion ( denso) rings a bell for some reason.

as usual the nav/tv wont work here. the stacker will be on its last legs as well.

have fun..

  • 2 weeks later...
yep they are lots of funs to remove and the stacker is a sony A30 unit. they are indeed factory fit on these cars and removing one involves a LOT of rewiring as EVERYTHING is tied to a module behind the rear seat. can't remeber the make of the actual unit but clarion ( denso) rings a bell for some reason.

as usual the nav/tv wont work here. the stacker will be on its last legs as well.

have fun..

Hi Chris,

The unit has Nissan CW726 written on it. It has a 7" (approx) screen that shows either current radio station, cd stacker info, tv or input from the front mounted a/v inputs. The stacker itself has Nissan written on it too, and its a six stacker.

Any ideas on where I might get information on it, google returns one link (in japanese) and thats all.

I dont think its a Clarion unit as I believe those units allow the screen to retract into the dash, this screen stays out all the time although the angle is adjustable.

Any help appreciated.

Mike

its a clarion unit. ( the aftermarket clarion is motorised these arent.) nissan have used clarion in most of their cars for years. the only exception seems to be a xenavi item I worked on a while back.

its a clarion unit.  ( the aftermarket clarion is motorised these arent.) nissan have used clarion in most of their cars for years. the only exception seems to be a xenavi item I worked on a while back.

Hi Chris,

Ok, thanks for that. So I guess I could try Clarion for some info. I'd like to get hold of a schematic diagram or service manual, at least that way I can see if it can be modified for PAL.

Mike

Hi Chris,

Ok, thanks for that. So I guess I could try Clarion for some info. I'd like to get hold of a schematic diagram or service manual, at least that way I can see if it can be modified for PAL.

Mike

Check this thread here for a link to a company that does PAL conversions:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=67425

is it possible to get a dvd player to hook up to the tv that accepts pal dvds but converts to ntsc for the jap tv?

It may be possible, most of the current home DVD players can be set to output either PAL or NTSC irrespective of the DVD type, so you'd need to make sure the car versions do the same.

For me it wasnt about DVD tho, i was thinking it would be cool to be able to listen to the V8 Supercar races if I happened to be on the road at the time of the telecast.

mike

is it possible to get a dvd player to hook up to the tv that accepts pal dvds but converts to ntsc for the jap tv?

Yep, there are more than a few in-car DVD players that do just that, they have an NTSC video output on them so that they can be plugged into OEM screens that have a video aux-in connector.

Yep, there are more than a few in-car DVD players that do just that, they have an NTSC video output on them so that they can be plugged into OEM screens that have a video aux-in connector.

Can you suggest any reasonably priced (mp3 + tuner) models ant?

best I've come up with so far (price/value/quality wise) is http://www.jvc-australia.com/products/_pro...ils.asp?ID=1397

ok that changes things:

try this:

http://www.audioexpress.com.au/shop/item_s...?code_no=VS9910

price ( I need to update mine) is $1900

I already have a ntsc tv that came with nav system. Want a single din unit that accepts pal outputs ntsc + mp3 + tuner. Similar to this http://www.jvc-australia.com/products/_pro...ils.asp?ID=1397

Can you suggest any reasonably priced (mp3 + tuner) models ant?

best I've come up with so far (price/value/quality wise) is http://www.jvc-australia.com/products/_pro...ils.asp?ID=1397

If you aren't too worried about the brand, found the following after a quick google search:

http://www.strathfield.com/Products.asp?CatID=186

There are plenty of similar cheap no-brand units out there.

Though that JVC unit is pretty good value for money I reckon, cheaper than some high end CD units I've seen!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...