Jump to content
SAU Community

For sale: Turbo off R33 $200 -will trade for lwo/high mount exhaust manifold for RB25

SoarertoR33
 Share

Recommended Posts

SoarertoR33 Apprentice

SoarertoR33

Posted
Posted

I have a series 1 turbo taken from my r33 RB25DET skyline. The car has done 150,000kms and from what i can tell the turbo is origional.

PLEASE NOTE: The compressor wheel is not made from the plastic/nylon gear the compressor wheel is made from steel and only looks black in the pics due to a shitty cammera and dirt build up. The model number on the turbo is 45V3.

The car blows absolutly NO SMOKE. The turbo has minimal shaft play approx 1-1.5mm back and forward. The turbo does not come with bend pipe, water lines, oil lines and is missing the actuator.

The turbo was taken off by B&R Motorsport up here in Brisbane, for upgrade to GT30, and i was told that they broke the actuator when the pulled it off.

This turbo makes an awsome upgrade for the RB20DET as it bolts straight on. The actuator from the RB20DET turbo will also fit on to this turbo.

I am looking for $200 + Postage OR a clean swap for an Exhaust Manifold either Low mount or High mount, preferably Low, either new or used that is in good condition that will fit the RB25DET factory turbo and RB25DET Head.

Brisbane and sorrounding area buyers can also have a look at the turbo before purchase if that helps.

Sorry about the pics they are taken by cammera fone and there as good as it gets.

Thanks for looking.

Greg.

P.s. I allready have a factory low mount manifold, i'm after a stainless steel one. Thanks for the offers anyway.

nisr32 Collaborator

nisr32

Posted
Posted

hey mate i am also in brisbane very interested.

is it still for sale.

when are you free to come and have a look ???

thanks look forward to here from you soon

email reply to [email protected]

or sms me on 0404739079

predator Grand Master

predator

Posted
Posted

The turbo does not come with bend pipe, water lines, oil lines and is missing the actuator.

can you read??? or is fidel too busy smoking too many wacky cigars??!

  • 2 months later...
NZM.031 Grand Master

NZM.031

Posted
Posted

hey mate, ill take the turbo if you still have it, i am taking my hiflowed unit off and need a standard one to replace it so i can sell the car. i need it asap.

cheers

Linton

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...