Jump to content
SAU Community

Full Turbo Kit for RB25/20

XZLA.8
 Share

Recommended Posts

XZLA.8 Experienced

XZLA.8

Posted
Posted

Turbo Package suit RB20, RB25, RB30, SR20 & Tough CA18.

Turbo Package Consists Of:

A Percision T04e, (with a T/3 Flange,)

Turbo Bag

40mm Waste Gate,

Braiden lines,

Gaskets, Bolts, Chrome fittings and V-Band fitting

Also includes Hks Pod Filter.

This turbo package is capable of making 300rwkw on only 14 psi. The turbo have steel front and back wheels and are brand new are rated at 550hp. it is also 360 thrust bearing The package comes with all of the necessary fittings to make it an easy fit to any car, there is no manifold included, was bought from this forum and never put on, now selling and using cash for other investment.

PRICE DROP $850 FIRM NEED TO SELL ASAP

PM or call 0400261099

Link to comment
https://www.sau.com.au/forums/topic/71707-full-turbo-kit-for-rb2520/
Share on other sites
XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted

I think you have confussed this sale with others going around, cos I do know what turbos you are talking about and I assure you and everyone else that this is not one of them.

I will be reciving the full details on the turbo aswell as all the specs tommrrow and as soon as i do i will be posting it.

This is not the dicussion section and I will not be disscusing "cheap china turbos" in this tread, if you wish to dicuss this any further i suggest you send me a PM or call me on 0400261099, or I will be forced to report you to admin.

I also can supply the number of the person I bought this turbo from who will back me up 100% as when he bought it (two of them) he also had it checked up by a performance shop in brisbane "driftking" i belive, who said they were more then fine, once again, details via PM.

Rs,

infected flow Rising Star

infected flow

Posted
Posted

****en what is it with you posting this thread all the time if your not intrested dont ****en buy it and dont post!

this is the second thread u have done this too!

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
Conidering it has a T3 flange, will it bolt directly into the standard R33 low mount turbo manifold? Also, would it need a new FMIC to get about 10-12psi of boost? ...my baby's in deparate need of a new turbo..

It will bolt onto a R33 manifold, The factory cooler should be fine on low boost but it would be better with FMIC,

Open to offers,

Rs,

TimmyC Collaborator

TimmyC

Posted
Posted

you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

I belive there is not much difference between The rear being 0.64 and 0.84, I have seen a 0.84 on a 4cyl and the car pulls hard all throught the rev range.

Remember big power = lag, it will bolt straight on and if you find the 0.84 to laggy for your likin then you could always take it off and replace the rear housing with a 0.64.

Rs,

hefer81 Collaborator

hefer81

Posted
Posted

a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

PM sent

Rs,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...