Jump to content
SAU Community

Full Turbo Kit for RB25/20

XZLA.8
 Share

Recommended Posts

XZLA.8 Experienced

XZLA.8

Posted
Posted

Turbo Package suit RB20, RB25, RB30, SR20 & Tough CA18.

Turbo Package Consists Of:

A Percision T04e, (with a T/3 Flange,)

Turbo Bag

40mm Waste Gate,

Braiden lines,

Gaskets, Bolts, Chrome fittings and V-Band fitting

Also includes Hks Pod Filter.

This turbo package is capable of making 300rwkw on only 14 psi. The turbo have steel front and back wheels and are brand new are rated at 550hp. it is also 360 thrust bearing The package comes with all of the necessary fittings to make it an easy fit to any car, there is no manifold included, was bought from this forum and never put on, now selling and using cash for other investment.

PRICE DROP $850 FIRM NEED TO SELL ASAP

PM or call 0400261099

Link to comment
https://www.sau.com.au/forums/topic/71707-full-turbo-kit-for-rb2520/
Share on other sites
XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted

I think you have confussed this sale with others going around, cos I do know what turbos you are talking about and I assure you and everyone else that this is not one of them.

I will be reciving the full details on the turbo aswell as all the specs tommrrow and as soon as i do i will be posting it.

This is not the dicussion section and I will not be disscusing "cheap china turbos" in this tread, if you wish to dicuss this any further i suggest you send me a PM or call me on 0400261099, or I will be forced to report you to admin.

I also can supply the number of the person I bought this turbo from who will back me up 100% as when he bought it (two of them) he also had it checked up by a performance shop in brisbane "driftking" i belive, who said they were more then fine, once again, details via PM.

Rs,

infected flow Rising Star

infected flow

Posted
Posted

****en what is it with you posting this thread all the time if your not intrested dont ****en buy it and dont post!

this is the second thread u have done this too!

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
Conidering it has a T3 flange, will it bolt directly into the standard R33 low mount turbo manifold? Also, would it need a new FMIC to get about 10-12psi of boost? ...my baby's in deparate need of a new turbo..

It will bolt onto a R33 manifold, The factory cooler should be fine on low boost but it would be better with FMIC,

Open to offers,

Rs,

TimmyC Collaborator

TimmyC

Posted
Posted

you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

I belive there is not much difference between The rear being 0.64 and 0.84, I have seen a 0.84 on a 4cyl and the car pulls hard all throught the rev range.

Remember big power = lag, it will bolt straight on and if you find the 0.84 to laggy for your likin then you could always take it off and replace the rear housing with a 0.64.

Rs,

hefer81 Collaborator

hefer81

Posted
Posted

a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

XZLA.8 Experienced

XZLA.8

Posted
  • Author
Posted
a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

PM sent

Rs,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...