Jump to content
SAU Community

Recommended Posts

Hi guys..

2 days ago while i was driving around i felt my stering whel started to get hardened up on me and i also noticed that the hicas lite came on at around 60kmph and flashing... i also found out that my Speddo and ODO meter are not working either :) This morning i try to start the car and it dint.. i've got a RSM and it was showing between 9.6 and 10.1 Volts. So i took it to my mechanic and tthey replaced the Alternator . but my steering wheel is stil get hard after 3-5 mins of driving and HICAS light turns on with it..

The mechanic checked the wire to the gearbox for the odo and speedo .. abd they were fine and he said it might be my Dash. ???!?!!

I have got a after marker Steering wheel and Boskit so i have disconnected the HICAS module (3 years ago)

I was wondering if any of you guys had this problem. and iwould like to now the solution if there is any..

Cheers Guys.

Babak

Theevil, i do have a Blitz Supersonic BOV , but wat does it have to do with the power steer and ODO problem??

GTTR34 - Yeah everything else is working properly. and i also check all the fuses but they wer all OK. by the way my mech said that this model dash is a mechanical speddo and odometer dash. I called ADVAN in Sydney and Mr. "RipOff" Peter Hopkin said for the cable he charges me $180 + $90p/h Labor :P

Anyways.. thats news so far.

Thanks guys.. for ur attention to this thread.

Babak

try looking at these thread

http://www.skylinesaustralia.com/forums/sh...hlight=stalling

http://www.skylinesaustralia.com/forums/sh...hlight=stalling

i think the reason why your car does cut off when driving is because your BOV is atmospheric and does not 'plumb back'. Skylines have sensitive air flow meters

What do I know? SFA but I do know the hicas is linked to the speed of your vehicle and that when hicas cuts out so does power steering as mine does when it gets wet:rant: I solved this by spraying lanosol on the connectors and it stopped but dont think this is your problem. It sounds like a speedo/wiring sort of thing but I know SFA.

ok thank u guy.. i think i might get the Speddo Cable fixed first then ill see if its ganna fix the hicas problem by doing this so.

Cheers again guys...  :D

Babak

Fixing the speedo cables should take care of the HICAS and power steering weight issue, have a look at my post in this thread:

http://www.skylinesaustralia.com/forums/sh...793#post1356793

  • 4 weeks later...

MRPREZ,

Hey dude, I've got the same problem as you. Sometimes at night, when i turn on some music, and then i turn on the heater, HICAS comes on AND the Steering wheel hardens up too. However, I changed the battery and everything is all sugar.. So try that out..

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Went to a drift practice day at a local circuit (held on the reserve parking area behind the grandstand) for the first time in about 15 years. Some kei cars were drifting as well, a not so surprising Suzuki Carry truck, and two 1st gen Daihatsu Copens that were converted to rear wheel drive(!) using Daihatsu Boon X4 transfer case, prop shaft and rear diff, obviously omitting the front driveshafts. They looked really fun to slide. I heard that they cost "about half" as much as a Nissan Silvia etc to run.  On the track 'Tech M' a local BMW tuning garage had a customer track day. Mainly recent models but there was one E36 which looked ancient among all the current models. It was cool watching the drifting and then turning around and seeing random people thrashing their M3/4s  central-circuit-drift-practice-2025-05-18-long-yt.mp4
    • I prefer it with those wheels (sacrilege?) 😋 Here's a photo of a fully original one for reference. The price is $350K....
    • I would like to keep it around 15k but if I need more to make it reliable and not have to worry about the car breaking I can go more. It's my project car so I'm just trying g to figure out what needs to be in it i know basic things like turbo cams injectors I'm just unsure of the size and the specifics so I'm spending alot of time on Google and its mostly rb25 and rb26 not alot on neo
    • This. They would need some tricky maneouvering to keep the income out of the country (the US). Which isn't helpful if that's where you want the income to end up.
×
×
  • Create New...