Jump to content
SAU Community

Recommended Posts

I was down at the RTA transferring the registration for a car i had just bought when i started talking to the guy about the 15yr old car i'm importing (i was asking whether it is possible to drive it to the compliance workshop - which it is apparently).

But then he told me that after it gets the blue slip it may get knocked back by the RTA, meaning it has to go for a 3rd Tier inspection at an RTA station (because its more than 10yrs old).

He said that it might not happen, but that i should prepare for it so that its not a surprise

Has anyone had that happen to them? Is this common? I've heard they are extra strict there...

Link to comment
https://www.sau.com.au/forums/topic/73451-3rd-tier-inspection-by-the-rta-nsw/
Share on other sites

  • 2 weeks later...
they always pick imports for 3rd tier inspections.

they are 50/50 picks on any other car.

With the 15yr old imports they usually don't get inspected. Once you have Engineers certificate and blueslip, RTA just registers it.

With RAW complied vehicle getting registered in personal name, they always get inspected, but RAW vehicle getting registered in dealers name normally doesn't get inspected unless randomly selected.

They check numbers but also check for car in general. For example if car was too low they would probably knock it back.

Well, it has air suspension so height isnt so much of a worry (though even at 10cm height its hard getting up driveways!!!); I've had a look and to be honest there isnt that much 'defectable' stuff on it! (widebody/loud paint isnt illegal).

Got my fingers crossed though :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...