Jump to content
SAU Community

Recommended Posts

i have a gtst 1995 r33

i have recently put the boost to around 10psi, added a blitz pod filter, and had a tune aswell. it is the stock turbo etc

when i dump it really misses and ping and it just feels like the engine is missing

i have been told it is the stock fuel pump not being able to cope with the amount of fuel intake required

is it true

please help!!!!

Link to comment
https://www.sau.com.au/forums/topic/73744-ping-after-psi-bump-up/
Share on other sites

Pinging is bad and engine destroying - it happens very quickly so don't "dump" it until you either reduce the boost or fix the problem. Means that not enough fuel is getting there as the stock cooler "should" be ok with that sort of boost, so points at the fuel pump or regulator or injectors.

I think..

ahh k. is there much difference if any with the rb20det and the rb25det fuel pumps.

my mechanic is looking at it tonight and i will let ya ll know how it goes. how much can i get a fuel pump for....i would want one that can hold up to 550hp just so then i have alot more abilty than it actually needs

I bought a Walbro fuel pump for $230. There's cheaper options out there, but you'll have to wait.

Are you SURE it's not just missing, do you actually hear it ping? You said you had a "tune", did this involve putting it on the dyno and watching the AFRs?

If it's just missing, it's most likely that your plugs need re-gapping to a lower spec (ie 0.8mm instead of 1.1mm), due to the higher boost. Could also be a coil pack is on the way out.

thanks for that....i have herd it ping but the missing is chronic....like sometimes it sounds like a slow machine gun wen dumping it....like bupbupbupbup with miss's in between bup's

if that makes sence haha but thanx for that mate

yeh i herd that walbro are quality the $230 one...how much could that handle, what where the specs, and does any one know the specs of the stock standard 1995 r33 gts-t fuel pump.

Yep, that slow machine gun is defintely pinging. If it's audible like that, it's pinging very very badly. Turn the boost down!!

Not sure on how much the Walbro or Bosch intanks can handle, but they are quoted at about 500HP... lots of people on here with 250kw at the rears plus still only have intank replacements, so they'll support plenty of power :):)

my mechanic mate just picked it up a few hours ago to take it to his and retune it and turn the ignition timing down hoping that will stop it...its only at 10psi and i know people with it at 14 in the same situation but not pinging, but i still got more power than them cause they have idiots tuning there timing etc hehehe....been a big help cheers mate.

i have a gtst 1995 r33

i have recently put the boost to around 10psi, added a blitz pod filter, and had a tune aswell. it is the stock turbo etc

when i dump it really misses and ping and it just feels like the engine is missing

i have been told it is the stock fuel pump not being able to cope with the amount of fuel intake required

is it true

please help!!!!

I doubt it. Sounds like an ignition problem, but sometimes factory computer overcompinsates for increase in boost & richens mixture too much.

For you guys suggesting it's not pinging, tell me what this noise is :rofl:

I reckon it's pinging AND missing personally.. as I said above. Pinging due to 15psi on stock cooler, and missing due to high boost and plugs not gapped to support it.

like sometimes it sounds like a slow machine gun wen dumping it....like bupbupbupbup with miss's in between bup's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...