Jump to content
SAU Community

clutch replacement

=premo=
 Share

Recommended Posts

=premo= Mentor

=premo=

Posted
Posted

ive got a standard clutch.... it slips.... lots....

Can anyone sugest a budget clutch that would be reasonable for an aprox 180kw on a fourdoor R32?

i have a thing for pumping it halfway round a corner so durability would be good. my girlfriend dun drive my car much so it can be heavy as f**k, just dont have much moolar to put into it.

cheers :rofl:

Link to comment
https://www.sau.com.au/forums/topic/74125-clutch-replacement/
Share on other sites
=premo= Mentor

=premo=

Posted
  • Author
Posted

correct.

i looked at some other threads and the exceedy was mentioned but it didnt realy say what was so good about it or where to find a distributer etc. ill probably drop by the local parts shop tonite and see what they say but does someone have a web link to exceedy??

cheers

xRHETTx Mentor

xRHETTx

Posted
Posted
i'd go for a exceedy heavy duty clutch which is around $300...they can withstand a fair load so i guess 180kw should be no problem.

Thats a damn good price for an exedy HD clutch. Ive been looking around (part number NSK-7056HD) and the going price is around $450 or so.

The Dan Grand Master

The Dan

Posted
Posted

I can vouch for the excedy clutch. It withstood 220rwkw of punishment from me for nearly 2 years. You should be able to buy it from a company called ATAP. (Australian Truck and Auto Parts). They are usually cheaper than everybody but I'm not sure if you can buy from them. I can because I go through the company but check them out anyway. If you have too many dramas then I can probably get one for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...