Jump to content
SAU Community

is anybody interested in xtra heavy duty 9 puck cushioned ceramic clutch

danieltangtc
 Share

Recommended Posts

danieltangtc Rising Star

danieltangtc

Posted
Posted

Hi guys, i was just wondering if anyone is interested in getting their hands on a new cheap clutch kit? The clutch cover is a push type Nissan 2500lbs clamp load whilst the clutch disc is 9 puck cushioned ceramic.

I was able to get a set for 660 (+35 postage).

I dunno if more people are interested, somebody can try to bargain with the shop to sell us cheaper.

I know this is in the wrong section....but just wanna have a survey of who will be interested if this is possible.

The manufacturer is NPC performance clutchs and they use japanese parts (daikin, exedy) to make their clutch kits.

npcperformance.com.au

Dan

danieltangtc Rising Star

danieltangtc

Posted
  • Author
Posted

Hi guys, I am not a seller or anything, Im just about to pay for the clutch. If more people are interested, the boss Doug MAY be able to give us a better price...I dunno...no money will pass through me whatsoever ok...so I am not a seller...this probably is the wrong place to post this...but its the place where more people will see it.

If anybody is REALLY interested, Im 100% sure that you will be able to get each kit for below $600 as the boss agreed to do a trade in with my old clutch. He sends the new one, I swap them around, then send the old one back to him.

If people are interested, please contact the shop directly at (07) 32779403. Please also let me know you are interested so I can call them tomorrow to say that there are X number of ppl from SAU interested, can you give us a discount if we quote SAU. This is not a guarantee, i will call the shop tomorrow....depends how many ppl interested.

The kits are brand new by the way! They have 2nd hand reconditioned kits for cheaper...but Im not interested.

Dan

gtrken Grand Master

gtrken

Posted
Posted

We can supply 9 puck cushioned button clutch kits that come with a NEW 2400lb clamp pressure plate and new thrust bearing for $650 to suit RB's and SR's

That is our regular price. That is no trade , outright sale.

How many old clutch kits do you want, we have dozens out the back ? :)

Cheers

Ken

danieltangtc Rising Star

danieltangtc

Posted
  • Author
Posted

Hi gtrken,

The kits here retail for 660 normally, but the owner is willing to do it cheaper if I trade in my old clutch....Im trading in 2 old clutches to get 560 for the set :)

Dan

gtrken Grand Master

gtrken

Posted
Posted

Why would he want your old clutch unless he is rebuilding them?

We throw the old ones out, they are worthless to us.

As I said, we use a NEW pressure plate, not a rebuilt one. Thre is nothing wrong with a rebuilt one, we just prefer to use new.

To answer your PM, we are based in WA and shipping would make it expensive as there heavy but we may be able to do a deal for 10 or more of $590 plus shipping.

Cheers

Ken

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • PranK
      eBay "Hella" oil level sensor

      By PranK · Posted

      Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...