Jump to content
SAU Community

Recommended Posts

Hi,

I understand the fronts in an R32 are 6"x 4"..

i'm not really the handyman.. and dont have the tools or anything, so i wanted to know whether 5" would fit?

6" i believe i need a spacer.. and 4" is too small..

so 5" i guess i'd be pretty content.

Thanks.

If your replacing them with anything other than the stock specs than you need a speaker pod of some discription. You will get the best results with 6" speakers (a good set of components) and use your HU to run them if your not intending on using an amp.

Have a look at the thread Predator wrote about pods, very handy indeed and anyone can make them, not hard. You only need the basic tools to do it as well.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=71256

if you ahve any other question then ask away as someone will give you the answers you seek. :P

Simple to install larger speakers in the front...

Ive got 6.5" morel splits up there..... want to know how

take off door trim

Take off crappy old plastic thing that holds speaker to door.....

Get some medium thickness mdf.... like 12mm or something...(cut offs at hardware)

put black thing on mdf and trace around and mark where the screw holes are....

buy $20 jigsaw and cut around edge....

Put 6.5" speaker in the middle where the old hole is kind of lined up.... there is a bit of room to play with..... so dont stress... drill then jigsaw hole......

trial fit.. if it dosent work cut again or modify:D

put speakers in.. wire up... put tweeter on the little plastic thing on the inside of the side mirror... pops off easily and will take small screws.....

put crossover in middle of door.. under where you rest your arm and screw in place

make sure that nothing on the door trim pokes into the speaker......

wire up and listen to what you have created...

muhahahahah

Ed :D:D:D

Okay then, why is the sky blue?  

Now lets see how many people actually know that! :)

No one said these questions had to be car related, except maybe the forum rules!

The sky is blue because

The blue color of the sky is due to Rayleigh scattering. As light moves through the atmosphere, most of the longer wavelengths pass straight through. Little of the red, orange and yellow light is affected by the air.

However, much of the shorter wavelength light is absorbed by the gas molecules. The absorbed blue light is then radiated in different directions. It gets scattered all around the sky. Whichever direction you look, some of this scattered blue light reaches you. Since you see the blue light from everywhere overhead, the sky looks blue.

Hope that helps clear it up for you BADHABIT???

:cuddle:

jbl do a speaker that go straight in with a little triming on the corners with a tin snips just got a new alpine and they sound awesome

Bought some of these yesterday gunna have a feed then fit them up :)

Can you just remove the grille from the door panel itself rather than remove the whole door panel itself to fit them..?

Bought some of these yesterday gunna have a feed then fit them up :)

Can you just remove the grille from the door panel itself rather than remove the whole door panel itself to fit them..?

unless im mistaken you will have to remove the door pod completly. The grill is part of the door skin. Not hard to take on and off, takes about 2-3 mins once you know what your doing.

Well the speaker install went extremely smoothly :)

Removal of door trim nessacary but very easy, front speakers needed plastic edges (bout 5mm) cut off each corner to allow flush fitment.

Rear speakers requires removal off back seat and parcel shelf (again Piss easy) 6.5" rear speakers fit straight into factory holes.

Sound: Obviously far superior to previous weather beaten ripped ones (although they were Alpines), Kenwood MP3 Deck has ample power to run them and is quite loud, louder infact than the Factory system in my BA, but still dosnt offer the low down bass of the BA.

All up $260 for the Kenwood MP3 deck and $219 for all the JBL speakers you cant really go wrong ;)

Well the speaker install went extremely smoothly :)

Removal of door trim nessacary but very easy, front speakers needed plastic edges (bout 5mm) cut off each corner to allow flush fitment.

Rear speakers requires removal off back seat and parcel shelf (again Piss easy) 6.5" rear speakers fit straight into factory holes.

Sound: Obviously far superior to previous weather beaten ripped ones (although they were Alpines), Kenwood MP3 Deck has ample power to run them and is quite loud, louder infact than the Factory system in my BA, but still dosnt offer the low down bass of the BA.

All up $260 for the Kenwood MP3 deck and $219 for all the JBL speakers you cant really go wrong ;)

Sounds good mate, i can't wait to finish my install off. Rain sucks and without a garage it makes it kinda hard :chairshot

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...