Jump to content
SAU Community

Recommended Posts

http://www.mgccsa.org.au/vintagec.htm

Also, check the 'Hill Climb Sup Regs' PDF link on the left menu for more info.

I think the address is:

Collingrove Hill Climb

Lot 100, Hill Climb Road

Angaston Rural

This is where the WRX club use to have one of their track events, wish SA had an official SAU club.

Hillclimb - cool! I opened the Hillclimb Pdf, that indicates the Hillclimb to be on the following weekend 12 June 2005.. is that a second climb or the actual date? Let us know as I'm quite keen too

oops sorry, didnt check the dates there. The one 'jager' was referring to is this one - http://www.nissansilvia.com/forums/index.p...showtopic=91758

The track is 7kms SE of Angaston on the Angaston to Eden Valley Rd, if you get lost Im sure the locals in the Barossa can direct you.

OK, from town the easiest way is as follows.

1. Go straight up Main North Road

2. Go around the Gawler Bypass and keep heading along the Sturt Highway towards Nuriootpa.

3. You will come to a fairly major turn off to Tanunda on your RIGHT, via Gomersal Road (possibly Highway). Take this all the way to the end.

4. At the end turn LEFT onto the main street of Tanunda.

5. Continue down the street through Tanunda untill you come to a S-bend/railway crossing and turn RIGHT at the SECOND Road. (you want the one that is almost directly ahead, not the one back towards Tanunda)

6. Follow this road for a while ignore the first sign to Angaston(I've oly been that way at night so i don't really know it.) go over a train crossing and past the VINPAC factory on your right.

7. You will come to a cross intersection with a sign saying Angaston to the RIGHT , follow that. This will take you up the Main street.

8. When you reach the end of the main street you must turn RIGHT.

9. Follow this road past the Collingrove Homested, keep going untill you see a sign for the Collingrove Hillclimb on the left. Turn down the dirt road immediatly after the sign.

The gate to get in, is on the left, By this time you should have a pretty good idea of what's going on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you for the feedback bro. Looks like it’ll have to stay off the road till it gets an ecu 
    • Only if you do not You will not be able to drive it with any serious load without risk of it pinging, which will either slowly or rapidly kill it, depending on how bad it is.
    • Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • perfect, no rush to address the leaking bush then, it's not doing much/anything
    • I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
×
×
  • Create New...