Jump to content
SAU Community

Recommended Posts

Hi I recently upboosted my skyline to 10 pounds & started to encounter misfiring at about 4 to 5000 rpm. I thought it was problems with the spark plugs so i changed them to stock ones (1.1. gap), however the misfiring still occurs

Can someone pls advise me, my mods are turboback 3" exhaust & air filter...

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/75914-misfiring-at-4000rpm/
Share on other sites

Hey Zigen. I'm having some problems to. Though now it's happening at stock boost levels sometimes aswell.

Fitted new plugs 0.8mm gap. I think my coil packs are stuffed, they have burn marks on the side where the spark may have been escaping. Uping the boost puts more demand on the coil packs.

There are post here about aralditing up the coil packs. This may not be your problem but it seems a lot of people have had coil pack related problems.

I'll let you know how I go with mine.

Indeed it seems a lot of people are having issues with coil packs. The guy I'm buying my new car from says he just sold another R32 which needed some coil packs replaced and my new car I'm buying he says will need a few replaced which he is taking care of.

Is there some way of preventing this stuff happening cause it seems to happen a lot?

disconneted your battery. turn your ignition on and go mad on anythign that takes power... usually hold the brake on for a while... this will drain the comp of all power and reset it.

had the same problem today actually in a 33... not mine.... and it was fixed and it was running stock gaps and stock boost... reseting the comp seemed to fix it.. give it a go... 5 min fix.... hopefully

Instead of taping my coil packs, I gave the metal bracket a couple of coats of epoxy paint to act as an insulator, so a) it didn't earth very well with the rest of the engine, and B) to stop the spark from jumping to there.

But I dont think any of my coils were leaking in the first place, it was more a precautionary measure since I was changing the plugs anyhow.

Thanks for the advice guys, this sounds like a silly question but how do i gap the spark plugs to 0.8? I know my mechanic has an instrument which does it but how do i do it on my own? Where can i buy such an instrument? Thanks!!

You need a feeler gauge, only costs abuot $10 or so from any auto store.

It's basically a clip with a whole bunch of different thickness pieces of metal, that you can use to check the gap of the plug. To lower the gap, lock the plug in a vice and tap the top very lightly with a hammer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...