Jump to content
SAU Community

Recommended Posts

hey guys

My first post so big hello to all other ceffie owners-just imported an SR cefiro and am trying to comply it- need a few pointers on getting parts for this thing

I had a 7 point rollcage and had to remove the front- the sunvisors were removed and i will need them for complience-which ones will fit-i have tried 180sx ones but they were WAY to big- they also seem to have a switch under them??

Also wondering if anyone in sydney had a standard exhaust laying around that i could lend for a day?

Have more bits and pieces i have to go through also

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/75948-complying-ceffie-need-help/
Share on other sites

Yeah daniel my cage is differnt to youre one- i have the 7 point safety 21 cage and the front is different

I HAD to remove the front to register it -and can only keep the rear in if i remove the rear seats and register it as a 2 seater- pain in the ass

Im sure you guys get it a bit easier up on the sunshine coast- down here in nsw we get reamed ;)

But yeah any help with a stock exhaust would be greeted with much thanks

117 db is loud ;)

cheers

I had a 7 point rollcage and had to remove the front- the sunvisors were removed and i will need them for complience-which ones will fit-i have tried 180sx ones but they were WAY to big- they also seem to have a switch under them??

I believe nissan pintara ones fit, but you don't need sunvisors for compliance, i didn't have an sun visors and i passed.

David

you can quieten your exhaust be getting 2 metal platet thaf fit between your front pipe and your cat and between your cat and rear pipe

make em the same size and shape as the flange but drill about 50 holes in them about 6mm.

this WILL get your car under 90 DB. mine was 118!!!! i did this and got it down to 86db to get it thru rego.

it will run like shi tho :)

dont boost it like this!

hey dori where you going for compliance?

it's been 5 months since mine came in the country and im sick of looking in the garage...that sydney compliance center in orange grove told me $1450 on the phone, and when i went in to ask, he said minimum $1650. i think envy imports do then for about $1450 or $1500...but is there anywhere else that complies these cars apart from japlink?

ok my engineer will not sign off until i get sunvisors- tried skyline (r31, r33), 180sx, ae86 and pintara ones

Anyone got any ideas what will fit??? they seem to be rounded and pretty uncommon

Just want to get it on the road-will be heading to pick and payless tomorrow

any advice what to try would be great

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...