Jump to content
SAU Community

Recommended Posts

hey guys my car is givin me the absolute S***s latly, and today i noticed a noise coming from behind the dash, sounds like the middle aircon vents, the noise sounds like boiling water and goes for about 30 sec's but not when the car is started only when my acc is on, anyone have a clue to what this could be as its ampin me bigtime thanks guys

Link to comment
https://www.sau.com.au/forums/topic/77100-noise-behind-the-dash/
Share on other sites

Plastic gears in motors when will they learn?

This is the most common noise under the dash when something is ticking,knocking, making noise.

Arrow points to the motor that fails.

Its a lever that slips on the louver to vent the air to passengers feet.

Just unplug and forget about it.

aircon_noise.JPG

just actually noticed in firts post about boiling bubble sound:p

but to answer your question it will not effect directional airflow in anyway other than the passener side louver not working to the feet.

With your hand just close it because the drivers side one meets up with it anyway so if its turned on and you want the air down it will still make its way across.

This had to be done in my car and every function still works as intended.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
    • Are you guys meeting up with the Sydney SAU guys at Lambton Pool Carpark or heading straight in?
×
×
  • Create New...