Jump to content
SAU Community

Recommended Posts

Houston; we have a problem!

Take off in the R34 is proving to be quite troublesome at the moment; especially when the ground is wet or has loose materials on it.

The Slip signal comes on indicating a loss of traction, the engine loses power and i basically go nowhere. Now this is happening way too much for comfort - up a hill, off the mark on a flat road, and even going up a wet driveway.

Is there anyway this can be fixed? Is there a way of restoring power to the engine even when there is slipping?

I understand that it is probably a feature installed to stop burnouts, but seriously i just want to get off the mark without someone running up my ass!

Link to comment
https://www.sau.com.au/forums/topic/77530-r34-traction-control-slip-sensor/
Share on other sites

In the short term - Turn the TCS off :)

the TCS compares the speed of the rears to the spedd of the fronts, and if the rears are spinning faster - it thinks you're wheel spinning

HOWEVER

It's very sensitive and, like the GTR's ATTESA, it can sometimes sense if the rear tyre is nearly bald (compared to the front) which makes it look like the rear is spinning faster and BINGO - TCS!

Here's a quick list of the things I'd check

Rear Tyre wear

Tyre sizes (compare front to rears in this tool - http://www.miata.net/garage/tirecalc.html and make sure theres less than 0.5% difference)

Thanks everyone for your prompt advice... TCS switch will be experimented with ASAP!!!

As for new tyres? I think i'll stay, my tyres are @ 95% at the moment and they aren't bad...

Anyways, thanks again... will keep updates on the matter.

What toby19 said.  The switch should be to the left of the steering wheel near ur knees.  The power shouldn't cut at all if TCS is off but you will still see the SLIP light flash.

serious ????

Ive NEVER seen the slip light come on when TCS is off........

hmmm.......ill keep an eye on it next time...

OK played with TCS switch today and almost bloody lost control of the car... who woulda known that this tiny little switch is what keeps it so tame :(

I guess that either I'm a lead foot or I really don't know the car well enough yet.

The quest goes on...

No offence intended but yes you need to learn your car. I honestly think that skid pan and track days are the best thing for learning your car. You don't have to go so hard you kill it.

Once you get used to more power it's hard to imagine not being in full control with a stock turbo.

No offence intended but yes you need to learn your car. I honestly think that skid pan and track days are the best thing for learning your car. You don't have to go so hard you kill it.

Once you get used to more power it's hard to imagine not being in full control with a stock turbo.

Yeah no offence taken... i've had the car for 2 weeks all up so I'm not expecting any F1 championships yet!

Thanks for the advice though!

Wise words Bob.

I thought the car was a bit of a handful at first, but now it seems like you'd have to be doing something pretty stupid to lose control running the stock turbo.

Ok, so what do I need to do or where do I need to go in order to test this car out safely?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...