Jump to content
SAU Community

Recommended Posts

hey guys,

had a change of plans with my car... so alot is up for grabs

92' HCR32 RB20DET (mid 80,000kms)

BRAND NEW timing belt

BRAND NEW waterpump fitted

BRAND NEW tomei 1.2mm headgasket fitted

leakdown test performed

custom GTR style inlet manifold with xf falcon throttlebody

HKS TITAN twin plate clutch

the motor has not been run since this work has been carried out - so everythings brand new...

there are no injectors, no turbo/manifold... but has everythingelse. have receipts for all work carried out last week - this is one clean motor ready for boost to be screwed into it!

im after $3500 for the motor

R32 RB20DET gearbox in unknown condition - $400... previous owner said it was working fine but i myself never drove with this gearbox

Tein HA HCR32 coilovers - height and damper adjustable... no camber tops... no leaks... $1200

R33 RB25DET gearbox with modified R33 tailshaft to fit R32 (good for 33gbox conversion to ditch the ol 32 gbox) $1500 - have receipts for purchase of gbox and customisation of the tailshaft

PWR 50mm HCR32 (will also fit CA18 s13/180s and BNR32's) tripplecore aluminium radiator - used 8months... few fins bent (damn bugs!) but in perfect nick apart from that! very high quality! $600

Trust HCR32 aluminium coolant pipe kit (including aluminium pipe with water temp fitting hole, greddy silicone hoses and clamps) brand new hasnt been used - $130

Eastbear fiberglass fixed back bucket seat and eastbear seatrail for R32 - $600

Reggamaster wheels in silver - 17x8 +34/17x9 +38... no tyres... forged lightweight rims which are very sought after in japan (check Rezz's japan photo diary for pics of the same style rims on his r32)... one has a hairline fracture in the spoke but it doesnt even penetrate through at all... just on the surface $600

HKS Oil cooler kit for RB with GREX (Trust) oil filter relocation kit - $750

im in adelaide btw - would prefer to sell everything in adelaide but if you are happy to organise freight interstate im fine with that... not really negotiable at all atm... but will listen to NON ridiculous offers

- adz

Link to comment
https://www.sau.com.au/forums/topic/77590-fs-rb20-motor-package-r33-gbox-sa/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...